Skip to content
FederalSources soughtOpen Federal notice

5960-01-444-8163F16 ElectronTubeApplication AN APG

Department of the Air Force› FA8122 AFSC PZAAB Tinker AFB, OK

Solicitation # 5960-01-444-8163F16_ElectronTubeApplication_AN_APG-66DualModeTransmitterUpdated Sep 1, 2026Scored Nov 20, 2026

Responses due

Dec 1

Dec 1, 2027, 12:15 AM EST

Posted Sep 1Due Dec 1

Summary by RFP Detector

What this RFP is about

Department of the Air Force (FA8122 AFSC PZAAB), part of the Department of Defense, posted a sources sought notice titled “5960-01-444-8163F16_ElectronTubeApplication_AN_APG” under solicitation number 5960-01-444-8163F16_ElectronTubeApplication_AN_APG-66DualModeTransmitter. It was posted on Sep 1, 2026. Responses are due Dec 1, 2027, 12:15 AM EST. No set-aside is listed. The place of performance is Tinker AFB, Oklahoma. The listed point of contact is Tracey Beringer.

Key facts

Sector
Federal
Notice type
Sources sought
As posted: Sources Sought
Category
Other
NAICS
Not stated
PSC
Not stated
Place of performance
Tinker AFB, OK
ZIP 73145
Value
Not stated
Solicitation #
5960-01-444-8163F16_ElectronTubeApplication_AN_APG-66DualModeTransmitter
Listing
Official federal notice

RFP Detector Score

Score breakdown

Every RFP starts at 50. Each factor adds or subtracts points compared with a typical RFP; unknown data counts as neutral.

Starts at 50

  • Value0.0unknown

    No value published, and there isn't enough award history to estimate one. Scored as neutral.

  • Competition & access−0.6estimated

    Full and open competition.

  • Issuer & market+3.2estimated

    34 other RFPs from Department of the Air Force on RFP Detector in the past 12 months; no award history found.

  • Time & stage+1.4measured

    Sources sought (market research, not a bid): 376 days to respond (due Dec 1, 2027, 12:15 AM EST). Long lead time.

  • Clarity & completeness+3.4estimated

    Documents not listed, named contact with email and phone, 1,116-word description.

  • Freshness−7.8measured

    Posted 79 days ago.

50 + contributions = 49 (D, Limited)

Score trend, last 30 daysScore history: 50, 49

Informational, not advice to bid or not bid. Score version 1.0.0, evaluated Nov 20, 2026.

Requirements & submission

Eligibility · Full and open competition

Full and open competition means the notice states no set-aside: any responsible business can respond, subject to the requirements in the notice.

Not stated in a form we could extract. See the official solicitation for requirements, evaluation criteria and submission steps.

From the official notice

Description

1,116 words

MANUFACTURING QUALIFICATION REQUIREMENTS NSN: 5960-01-444-8163 P/N: 588R901H02 Noun: Electron Tube Application: F-16 A/B AN/APG-66 Transmitter 29-Sep-22 Section C 1/3 SECTION C: 1. QUALIFICATION REQUIREMENTS THAT MUST BE SATISFIED TO BECOME A QUALIFIED SOURCE a. Prequalification Notice/Sources Sought: The offeror shall notify the appropriate government Small Business Office or, if responding to a solicitation, the contracting officer in the appropriate government contracting office, of intent to qualify as a source for this Electron Tube. b. Facilities, Testing, and Inspection Capabilities: The offeror must certify to the government that they have, or have access to, the required facilities and equipment to manufacture, inspect, test, package, and store the item. The offeror shall make their facilities, equipment, tooling, and personnel available for evaluation and inspection by the government. c. Data Verification: The offeror must verify that he has a complete data package. This verification must include a complete list of all procedures, drawings, and specifications, including change notices, in the offeror’s possession including, at a minimum MANUFACTURER (97942) drawing 588R901H02. The offeror may also be required to produce copies of all applicable procedures, drawings, or specifications. d. Manufacture/Process Verification: The offeror must manufacture this item to conform to the government requirements as prescribed within the ESA-approved engineering/technical data package. The offeror must show compliance with Unique Identification (UID) requirements in accordance with DFARS 211.274 as prescribed within the ESA-approved engineering/technical data package. The offeror must provide, at their own expense, data showing the results of all quality, performance, and environmental evaluations conducted by the offeror to show compliance with the government requirements as prescribed by 416 SCMS/GUEAA. The offeror shall also identify its sources for materials and its standards for internally used processes. e. Test and Evaluation and/or Verification: The offeror, at their own expense, shall prepare and submit to 416 SCMS/GUEAA for their prior approval, a qualification test plan/procedure detailing how they intend to verify compliance with all performance, environmental, mechanical, and quality assurance requirements identified by Drawing 588R901H02. After completion of the approved qualification testing, the offeror shall be required to submit a complete test report of the results to 416 SCMS/GUEAA for their review and approval prior to the contract award. The government retains the right to exercise the option to inspect the testing processes, including on-site witnessing of any or all documented testing. To allow accomplishing this, the offeror shall notify the government at least 30 days in advance of the occurrence of any testing that will be used as a basis for qualification. The offeror’s facilities shall be made available for government inspection during these tests. f. Qualification Article Verification: The offeror must provide, at their own expense, a pre-contract award qualification article for evaluation by the government. This article must comply with all of the requirements of Drawing 588R901H02. This article shall be subjected to a form, fit, and MANUFACTURING QUALIFICATION REQUIREMENTS NSN: 5960-01-444-8163 P/N: 588R901H02 Noun: Electron Tube Application: F-16 A/B AN/APG-66 Transmitter 29-Sep-22 Section C 2/3 function evaluation to demonstrate compatibility with the weapon system and to evaluate the manufacturing capability of the offeror. Offerors will be notified whether or not their qualification article passed or failed the required qualification testing within 90 days of submitting a product for qualification testing. Note that successful completion of the qualification testing does not guarantee any contract award. If the offeror is deemed qualified and awarded the contract, a post-contract award first article exhibit may be required to verify production capability. g. Qualification Requirement Cost Estimate: Estimated likely costs for testing and evaluation, which will be incurred by the potential offering party to become qualified: $3000. h. Qualification Time Completion Estimate: It is the estimate of the engineering support activity that completion of this qualification effort should require 180 days. This is based on complexity of the Electron Tube and other factors. i. Qualification Time Limitation: An offeror may not be denied the opportunity to submit and have considered an offer for a contract if the offeror can demonstrate to the satisfaction of the contracting officer that the offeror (or its product) meets these standards for qualification or can meet them before the date specified for award of the contract. The award will not be delayed to provide the vendor with an opportunity to demonstrate its ability to meet the standards specified in this qualification requirement. j. Evaluation of Proposals Not Previously Qualified: The offeror must be fully qualified in order to be eligible for a contract award. Therefore, the offeror must fulfill all of the requirements stated, in writing, in the qualification requirement before the date specified for award of the contract. Once all requirements are met, the offeror will be listed as an approved source for this item. Approval, however, does not guarantee subsequent contract award. MANUFACTURING QUALIFICATION REQUIREMENTS NSN: 5960-01-444-8163 P/N: 588R901H02 Noun: Electron Tube Application: F-16 A/B AN/APG-66 Transmitter 29-Sep-22 Section C 3/3 2. SOURCE QUALIFICATION WAIVER REQUIREMENTS Sources who meet any of the following source Qualification Waiver Criteria (QWC) may apply for a waiver of all or part of the qualification requirements. If a waiver is granted and the offeror is awarded a contract, the offeror may still be required to provide a post-contract award first article exhibit to verify production capability: a. QWC1: The potential source submits written certification that the articles have been supplied to the government or original equipment manufacturer (e.g., DD Form 250, Material Inspection and Receiving Report, Purchase Order invoice, etc). b. QWC2: NA c. QWC3: A source qualified to provide an assembly is usually qualified to provide subassemblies, major components, and items of that assembly. d. QWC4: A source qualified to provide earlier dash numbers of a basic P/N may be qualified to provide other dash numbers of that same basic P/N, provided there is no increase in complexity, criticality, or other relevant requirements. e. QWC5: A source qualified to provide a similar or like item can be qualified to provide the required item. However, for approval, the engineering authority must verify that there is no increase in complexity, criticality, or other requirements over that of the similar item. At a minimum, the source shall provide a complete set of drawings for the similar item and written proof, such as purchase orders, shipping documents, etc., to show that the similar item was provided to the original equipment manufacturer or DoD. f. QWC6: A source previously qualified to provide an item, but which has been purchased, sold, merged, absorbed, reformed, split, etc., may qualify if it can be established that the qualification is currently with the requester and that the requester has the same or equivalent facilities, tooling, equipment, personnel, and utilizes the original forging, castings, etc., in the manufacturing process. g. QWC7: NA

Documents

No documents are listed for this notice.

Contacts

Points of contact as published on the notice.

Timeline & history

  1. Sources Sought posted

  2. Responses dueNext · in 376 days

  3. Archive date on the official notice

Similar open RFPs

Same NAICS group or Other, nearby first, ranked by score.

Fair

OA-1K Request For Information

Department of the Air Force · Oklahoma City, OK

FederalSources sought
Posted Nov 19Due Dec 17, 2026, 5:00 PM EST (in 27 days)Federal notice
Fair

848 SCMG MQR Master Item List SEP 2026

Department of the Air Force · Tinker AFB, OK

FederalSources sought
Posted Nov 19Due Dec 31, 2028, 11:59 PM EST (in 773 days)Federal notice
Fair

748 Scmg Mqr 2026

Department of the Air Force · Tinker AFB, OK

FederalSources sought
Posted Nov 10Due Dec 31, 2027, 11:59 PM CST (in 407 days)Federal notice
Fair

748 Scmg Rqr 2026

Department of the Air Force · Tinker AFB, OK

FederalSources sought
Posted Nov 10Due Dec 31, 2027, 11:59 PM CST (in 407 days)Federal notice

RFP Detector Scores are informational.How we score →

More from Department of the Air Force

762 open RFPs from this issuer and its offices.

Limited

Replace Door Control Unit

Department of the Air Force · Fairchild AFB, WA

FederalSources soughtSmall business set-asideSupplies, Equipment & Furniture+1
Posted Nov 10Due Nov 20, 2026, 10:00 AM PST (in < 1 h)Federal notice
Poor

Med. Press. Pump Module Motor Rebuild

Department of the Air Force · Tinker AFB, OK

FederalSolicitationSmall business set-asideFacilities, Maintenance & Janitorial+1
Posted Nov 2Due Nov 20, 2026, 12:00 PM CST (in < 1 h)Federal notice
Limited

KC-135 Center Console Refresh (CCR) Revision 2

Department of the Air Force · Tinker AFB, OK

FederalSolicitationSupplies, Equipment & Furniture
Posted Jan 31Due Nov 20, 2026, 12:00 PM CST (in < 1 h)Federal notice
Limited

Serv C26-127 Repair Test Stands

Department of the Air Force · Tinker AFB, OK

FederalPresolicitationIT & Software
Posted Nov 17Due Nov 20, 2026, 1:00 PM CST (in 1 h)Federal notice
Strong

New Office at Wateree

Department of the Air Force · South Carolina

FederalSources soughtSmall business set-asideConstruction & Renovation+1
Posted Nov 16Due Nov 20, 2026, 2:00 PM EST (in 1 h)Federal notice

RFP Detector Scores are informational.How we score →

About this notice

Official federal notice. Updated Sep 1, 2026.

Official solicitation:Sign in free to open the official solicitation

RFP Detector is an independent service and is not affiliated with any government agency. Scores are informational.

RFP Detector is not affiliated with the organization that issued this RFP. Always rely on the official notice and confirm every date and requirement with the issuer.