550-26-121 FY27 NRM Emergent Repairs North Water Tower 71 & South Water Tower 94 CON
Department of Veterans Affairs · Danville, IL
Why this score
SDVOSB set-aside, 49 days to respond; but small typical award (~$124K).
Solicitation # FA440727RC001Updated Oct 28, 2026
This RFP closed on Oct 30, 2026.
Oct 30, 2026
Responses were due Oct 30, 2026, 4:30 PM CDT
Same NAICS group or Construction & Renovation, nearby first, ranked by score.
Department of Veterans Affairs · Danville, IL
Why this score
SDVOSB set-aside, 49 days to respond; but small typical award (~$124K).
Department of Energy · Batavia, IL
Why this score
31 days to respond, clear, complete notice; but limited award history ($23.7M FY24–FY26).
Federal Prison System / Bureau of Prisons · Marion, IL
Why this score
15 days to respond, clear, complete notice; but small typical award (~$45K).
Department of Veterans Affairs · Marion, IL
Why this score
SDVOSB set-aside, 23 days to respond.
Department of Veterans Affairs · Danville, IL
Why this score
SDVOSB set-aside, active buyer ($8.7B FY24–FY26); but thin documentation.
Department of Veterans Affairs · Hines, IL
Why this score
SDVOSB set-aside, new this week; but small typical award (~$102K).
RFP Detector Scores are informational.How we score →
Summary by RFP Detector
Department of the Air Force (FA4407 375 CONS LGC), part of the Department of Defense, posted a sources sought notice titled “Fuel Station Pump Repair” under solicitation number FA440727RC001. It was posted on Oct 28, 2026. The response deadline was Oct 30, 2026, 4:30 PM CDT. It is classified under NAICS 237120 (Oil and Gas Pipeline and Related Structures Construction) and product/service code Z2NA. The set-aside is listed as SBA Certified Women-Owned Small Business (WOSB) Program Set-Aside (FAR 19.15). The place of performance is Scott Air Force Base, Illinois. The listed point of contact is MSgt Nolan Strange.
Score at publication
Every RFP starts at 50. Each factor adds or subtracts points compared with a typical RFP; unknown data counts as neutral.
Frozen at publication: closed RFPs are not re-scored.
Starts at 50
No value published. Typical award is about $1M: the median of 72 Air Force contracts over $25K awarded in NAICS 237120, FY24–FY26.
Women-owned small business set-aside. The largest recipient took 23% of these dollars in FY24–FY26.
Air Force obligated $177M on NAICS 237120 across 101 contracts in FY24–FY26. 4 other notices from this office in the past 12 months.
Sources sought (market research, not a bid): 2 days to respond (due Oct 30, 2026, 4:30 PM CDT). Very tight.
Documents not listed, 2 named contacts with email and phone, 1,163-word description.
Posted today.
50 + contributions = 65 (B, Strong)
Informational, not advice to bid or not bid. Score version 1.0.0, evaluated Oct 28, 2026.
Eligibility · SBA Certified Women-Owned Small Business (WOSB) Program Set-Aside (FAR 19.15)
Women-owned small business (WOSB) set-asides are reserved for small businesses at least 51% owned and controlled by women, in industries the SBA lists as eligible.
Not stated in a form we could extract. See the official solicitation for requirements, evaluation criteria and submission steps.
From the official notice
The 375th Contracting Squadron is performing Market Research to identify potential SBA-certified Women-Owned Small Businesses (WOSB) under NAICS 237120 (Oil and Gas Pipeline and Related Structures Construction) with the qualifications, licenses, and technical capabilities to perform electrical conduit repair, drop tube replacement, and overfill alarm installation across designated fueling facilities at Scott Air Force Base, IL. Please contact MSgt Nolan Strange, nolan.strange.1@us.af.mil or Mr. Jody Noram, jody.noram.1@us.af.mil if you have any questions or concerns. DISCLAIMER: This Sources Sought is issued solely for information and planning purposes. It does not constitute a Request for Proposal (RFP), Invitation for Bid (IFB), or Request for Quotation (RFQ), nor does it guarantee a future solicitation will be issued. The Government will not reimburse respondents for any costs associated with preparing or submitting information in response to this notice. 3. Capability Statement Submittal Requirements Interested vendors possessing the required expertise, equipment, and certified personnel are invited to submit a Capabilities Statement (maximum 5 pages) addressing the following: Company Information: Company name, address, SAM Unique Entity Identifier (UEI), CAGE Code, Point of Contact (name, email, phone), and Socioeconomic status (e.g., 8(a), SDVOSB, WOSB, HUBZone, Small Business). Technical Capabilities & Experience: Summary of relevant past performance completed within the last three (3) years on underground storage tank (UST) fueling systems, conduit breakout/pour-back, overfill drop tube replacements, and Veeder-Root or automatic tank gauge (ATG) sensor/alarm installations. Licensing & Certifications: Confirmation that personnel hold required state/local UST service technician certifications, Veeder-Root certified installer/technician credentials, and applicable electrical licensing. Rough Order of Magnitude (ROM): Optional feedback on typical lead times, mobilization timeframes, and commercial pricing structure for tasks of this nature. PART 2: STATEMENT OF WORK (SOW) 1.0 Objective & Overview The Contractor shall furnish all necessary labor, supervision, materials, tools, equipment, testing apparatus, and transportation (except for specified Government/Owner-Furnished Equipment) to perform concrete breakout and conduit correction, electrical re-wiring, drop tube replacement, and overfill alarm installation across designated fueling facilities. 2.0 Detailed Scope of Work by Facility and Task TASK AREA 1: Premium Tank Sump Conduit Repair & Electrical Remediation The Contractor shall repair incorrectly poured conduit serving the Premium tank sump, complete necessary electrical re-pulls, and restore the concrete pad to original structural grade. Demolition & Concrete Breakout: Precision sawcut and breakout existing concrete around the Premium tank sump to expose the buried conduit line. Protect adjacent sump structures, lid seats, and underground utilities from collateral damage during breakout operations. Conduit Clearing & Realignment: Cut apart the obstructed/incorrect conduit run and clear out concrete or foreign debris resulting from the prior incorrect pour. Reconnect the conduit run using code-compliant, liquid-tight, fuel-resistant fittings and conduit rated for Class I, Division 1/2 hazardous fuel environments. Ensure proper pitch, sealing, and alignment. Electrical Wiring & Terminations: Pull new electrical conductors/wiring from the main building panel/control area to the tank sub-unit junction box in accordance with the National Electrical Code (NEC/NFPA 70). Terminate all wiring connections, verify seal-offs, and conduct comprehensive continuity, insulation resistance (megger), and operational tests to ensure proper equipment operation. Civil Restoration: Backfill excavated trench using suitable aggregate, compacted in uniform lifts to match surrounding base compaction specifications. Form and pour back high-early-strength concrete to match the existing grade, thickness, and finish of the fueling apron. TASK AREA 2: Facility 6047806 – Tank 3 Drop Tube Replacement The Contractor shall remove obsolete fill hardware and install a compliant drop tube assembly on Tank 3. Hardware Removal & Disposal: Remove the existing fill adapter, fill cap, and drop tube assembly. Safely load, manifest (if required), transport, and legally dispose of all obsolete components off-site in compliance with all local, state, and federal environmental regulations. Furnish & Install New Hardware: Furnish and install one (1) new OPW overfill prevention drop tube (or Government-approved equal), one (1) new fill adapter, and one (1) new heavy-duty locking cap. Special Technical Condition: Work assumes the existing drop tube is removable without structural failure and the existing spill container (spill bucket) remains sound and reusable. If the drop tube is seized or the spill bucket is found to be compromised/damaged, the Contractor shall immediately notify the Contracting Officer Representative (COR). Any required replacement of seized components or spill containers shall be evaluated and authorized via a formal bilateral change order prior to proceeding. Regulatory Compliance Verification: Set and verify that the drop tube shutoff mechanism operates at the exact level mandated by 40 CFR Part 280 / state UST regulations (e.g., 95% tank capacity shutoff or 90% flow restriction). Deliverables & Documentation: Document pre-work conditions, intermediate installation stages, and final configuration with high-resolution digital photographs. Submit photos and completed compliance checklist with the final job completion paperwork. TASK AREA 3: Facility 6047801 – Overfill Alarm Installation The Contractor shall remove the existing overfill alarm and install owner-provided Veeder-Root monitoring hardware. Demolition: Disconnect and remove the existing overfill alarm unit; transport and dispose of all removed scrap components off-site. Installation of Government/Owner-Furnished Equipment (GFE/OFE): The Government/Owner will provide: One (1) Veeder-Root Overfill Alarm (Part # 790091-001 / SKU: 790091-001) One (1) Veeder-Root Universal Sensor Mounting Kit (Part # 330020-012 / SKU: 330020-012) The Contractor shall furnish all certified labor, wiring, hardware, seals, and incidental consumables to properly mount, wire, and integrate the alarm with the existing automatic tank gauge (ATG) system. Testing & Commissioning: Perform functional operational checkout of the Veeder-Root alarm and sensor assembly to verify positive alarm annunciation and correct signal communication to the console. Deliverables & Documentation: Take detailed digital photographs of the completed installation, wiring junction, and console status screen indicating an operational, alarm-free condition. Submit completion paperwork and test verification logs to the COR. 3.0 Site Cleanup, Waste Management & Housekeeping Debris Haul-Off: The Contractor shall continuously maintain a clean and safe work zone. Upon completion of each task, the Contractor shall collect, load, haul off, and legally dispose of all concrete rubble, excavated soils, cut conduit, old wiring, discarded drop tubes, and packaging debris. Hazardous Materials: Any fuel-wetted materials or petroleum rags generated during servicing shall be managed and disposed of in accordance with applicable RCRA and local environmental standards. 4.0 Submittals and Deliverables Deliverable Site Safety Plan & AHAs Activity Hazard Analysis for sawcutting, confined spaces, and hazardous fuel zones Technician Certifications Veeder-Root certified technician & state UST licenses With quote / proposal submittal Drop Tube Compliance Verification Documented drop tube shutoff height calculation and verification sheet Photo Documentation Package Clear digital photos showing before, during, and after conditions for all tasks Disposal Manifests/Receipts Proof of lawful disposal for concrete and metallic/fuel-wetted scrap 5.0 Safety, Code Compliance & Working Conditions Safety Regulations: All work shall comply with OSHA 29 CFR 1910 and 1926 standards, NFPA 30 (Flammable and Combustible Liquids Code), NFPA 30A (Motor Fuel Dispensing Facilities), and NFPA 70 (National Electrical Code). Hot Work & Hazardous Locations: Sump areas represent Class I, Division 1/2 environments. The Contractor shall implement atmospheric monitoring (LEL meters) and obtain all required hot work permits before operating saws, cutting tools, or electrical equipment near open sumps.
No documents are listed for this notice.
MSgt Nolan Strange
PrimaryJody L. Noram
Points of contact as published on the notice.
1 change since posting.
Sources Sought posted
Responses were due
Status changed to archived
Federal award history
Department of the Air Force · NAICS 237120 · FY24–FY26
Recipients of past awards in this market, not the incumbent of this RFP.
| Fiscal year | Obligated ($) |
|---|---|
| FY2022 | 29,339,186.2 |
| FY2023 | 49,531,388.63 |
| FY2024 | 61,188,023.58 |
| FY2025 | 81,677,114.13 |
| FY2026 | 34,002,241.23 |
Federal contract award records, award types A–D, FY24–FY26. Updated Nov 15, 2026.
752 open RFPs from this issuer and its offices.
Department of the Air Force · Goodfellow AFB, TX
Why this score
Small-business set-aside, recently updated; but only less than a day left.
Department of the Air Force · Little Rock Air Force Base, AR
Why this score
Small-business set-aside; but only less than a day left.
Department of the Air Force · Tinker AFB, OK
Why this score
Active buyer ($1.1B FY24–FY26), recently updated; but only less than a day left.
Department of the Air Force · JB Andrews, MD
Why this score
Recently updated; but only less than a day left.
Department of the Air Force · Shaw AFB, SC
Why this score
Small-business set-aside; but only less than a day left.
RFP Detector Scores are informational.How we score →
Official federal notice. Updated Oct 28, 2026.
Official solicitation:Sign in free to open the official solicitation
RFP Detector is an independent service and is not affiliated with any government agency. Scores are informational.
RFP Detector is not affiliated with the organization that issued this RFP. Always rely on the official notice and confirm every date and requirement with the issuer.