Skip to content
FederalSolicitationOpen Federal notice

Test Set Subassembl, in Repair/Modification of

Department of the Navy› NAVSUP Weapon Systems Support Mech

Solicitation # N0010425QNE53Updated Oct 28, 2026Scored Nov 18, 2026

Responses due

Nov 27

Nov 27, 2026, 4:30 PM AST

Posted Aug 18Due Nov 27

Summary by RFP Detector

What this RFP is about

Department of the Navy (NAVSUP Weapon Systems Support Mech), part of the Department of Defense, posted a solicitation titled “Test Set Subassembl, in Repair/Modification of” under solicitation number N0010425QNE53. It was first posted on Aug 18, 2025 and has been updated 11 times since. Responses are due Nov 27, 2026, 4:30 PM AST. It is classified under NAICS 333998 (All Other Miscellaneous General Purpose Machinery Manufacturing) and product/service code 4921. No set-aside is listed. The listed point of contact is Telephone: 7176051552.

Key facts

Sector
Federal
Notice type
Solicitation
PSC
4921
Place of performance
Not stated
Value
Not statedTypical award in this market ≈ $92.2K
Solicitation #
N0010425QNE53
Listing
Official federal notice

RFP Detector Score

Score breakdown

Every RFP starts at 50. Each factor adds or subtracts points compared with a typical RFP; unknown data counts as neutral.

Starts at 50

  • Value−8.1estimated

    No value published. Typical award is about $92K: the median of 474 Navy contracts over $25K awarded in NAICS 333998, FY24–FY26.

  • Competition & access+0.3measured

    Full and open competition. The largest recipient took 20% of these dollars in FY24–FY26.

  • Issuer & market+3.8measured

    Navy obligated $218M on NAICS 333998 across 965 contracts in FY24–FY26. 922 other notices from this office in the past 12 months.

  • Time & stage+1.5measured

    Solicitation, bids due: 10 days to respond (due Nov 27, 2026, 4:30 PM AST).

  • Clarity & completeness+2.8estimated

    Documents not listed, named contact with email, 2,348-word description.

  • Freshness−3.4measured

    Updated 21 days ago.

50 + contributions = 47 (D, Limited)

Score trend, last 30 daysScore history: 53, 52, 51, 50, 48, 47

Informational, not advice to bid or not bid. Score version 1.0.0, evaluated Nov 18, 2026.

Requirements & submission

Eligibility · Full and open competition

Full and open competition means the notice states no set-aside: any responsible business can respond, subject to the requirements in the notice.

Not stated in a form we could extract. See the official solicitation for requirements, evaluation criteria and submission steps.

From the official notice

Description

2,348 words

CONTACT INFORMATION|4|N744.7|CFC| 771-229-1462|JORDAN.D.NEELY@NAVY.MIL| ITEM UNIQUE IDENTIFICATION AND VALUATION (JAN 2023)|19|||||||||||||||||||| HIGHER-LEVEL CONTRACT QUALITY REQUIREMENT (DEC 2014)|1|See specifications Section C and Section E.| INSPECTION OF SUPPLIES--FIXED-PRICE (AUG 1996)|2||| INSPECTION AND ACCEPTANCE OF SUPPLIES|26|X||||||||||||X|||||||||||||| DESIRED AND REQUIRED TIME OF DELIVERY (JUNE 1997)|29|CLIN 0001AA|1|120||||||||||||||||||||||||||| WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (JAN 2023)|16|Stand-Alone Receiving Report - Certifications; COMBO - Receiving Report & Invoice - Material|N/A|TBD|N00104|TBD|TBD|SEE SCHEDULE|TBD|N/A|N/A|TBD||||SEE FORM DD1423|| NAVY USE OF ABILITYONE SUPPORT CONTRACTOR - RELEASE OF OFFEROR INFORMATION (3-18))|1|WSS| WARRANTY OF SUPPLIES OF A NONCOMPLEX NATURE (JUNE 2003)|6|One year from date of delivery.|One year from date of delivery.||||| BUY AMERICAN-FREE TRADE AGREEMENTS-BALANCE OF PAYMENTS PROGRAM-BASIC (FEB 2024)|11|||||||||||| NOTICE OF TOTAL SMALL BUSINESS SET-ASIDE (OCT 2020)(DEVIATION 2020-O0008)|1|| SMALL BUSINESS PROGRAM REPRESENTATIONS (FEB 2024)|4||||| BUY AMERICAN-FREE TRADE AGREEMENTS-BALANCE OF PAYMENTS PROGRAM CERTIFICATE-BASIC (FEB 2024))|5|||||| BUY AMERICAN-BALANCE OF PAYMENTS PROGRAM CERTIFICATE-BASIC (FEB 2024)|1|| ANNUAL REPRESENTATIONS AND CERTIFICATIONS (MAR 2025)(DEVIATION 2025-O0003 AND2025-O0004))|13|333998|700|||||||||||| NOTICE OF PRIORITY RATING FOR NATIONAL DEFENSE, EMERGENCY PERPARDENESS, AND ENRGY PROGAM USE (APRIL 2008))|2||X| 1.This requirement is pursuant to Emergency Acquisition Flexibilities (EAF). 2.The resultant award of this solicitation will be issued bilaterally, requiring the contractor's written acceptance prior to execution. 3.All contractual documents (i.e. contracts, purchase orders, task orders, delivery orders, and modifications) related to the instant procurement are considered to be "issued" by the Government when copies are either deposited in the mail, transmitted by facsimile, or set be other electronic commerce methods such as email. The Government's acceptance of the contractor's proposal constitutes bilateral agreement to "issue" contractual documents as detailed herein. 4.If the offeror is not the Original End Manufacturer (OEM) of the material called out in the requirement, the OEM must be stated (Company Name and CAGE) and the offeror must provide a signed letter of authorization as a distributor on the OEM's letterhead. 5.If requirement will be packaged at a location different from the Offeror's address, the Offeror shall provide the Name, Street Address and CAGE of the Packaging Facility. 6.Any contract awarded because of this solicitation will be DO certified for national defense under the Defense Priorities and Allocations System (DPAS). Provision 52.211-14, Notice of Priority Rating for National Defense, Emergency Preparedness, and Energy Program Use shall be inserted in solicitations when the contract to be awarded is a rated order. 7.Please provide repair price as Estimated (EST) for the full repair effort of the requirement. 8.Vendor shall have 90/120 days after receipt of carcass(es) to complete a teardown & evaluation (TD&E) of the carcass(es) and submit a Firm-Fixed Price (FFP) quote for the full repair effort of the carcass(es). 9.When submitting a quote, please include the cost of new (actual or estimated) for evaluation purposes. 10.The quote shall specify any exceptions including but not limited to MIL-STD Packaging, MIL-STD Labeling, Inspection & Acceptance locations, Packaging House, surplus materials, etc. If no exceptions are indicated or received, the award shall be based upon solicitation requirements. Changes or requests for changes after award shall be subject to consideration costs deducted from the unit price. 11.In repair price, include all costs associated with receipt and complete repair of material that may be in unwholly condition, missing hardware, damaged, handling damage, missing parts, wear damage, and CAV Reporting. Also provide the following information: a.Teardown & Evaluation Rate: b.Repair Turn Around Time (RTAT): c.Throughput Constraint: d.Induction Expiration Date: 12.PRICE REDUCTIONS a.Any asset for which the contractor does not meet the required RTAT will incur a price reduction of XXXX per unit. This adjustment will be implemented via a Reduction Modification at the end of the contract performance. Price reductions made pursuant to this section shall not limit other remedies available to the Government for failure to meet required RTATs, including but not limited to the Government's right to terminate for default. 13.The Contractor must obtain final inspection and acceptance by the Government for all assets within the RTAT established in the resulting contract. a.Requested RTAT: 16 Days 14.Quotes shall reference the proposed RTAT and any capacity constraints. \ 1. SCOPE 1.1 This contract/purchase order contains the requirements for manufacture and the contract quality requirements for the TEST SET SUBASSEMBL . 2. APPLICABLE DOCUMENTS 2.1 Applicable Documents - The document(s) listed below form a part of this contract/purchase order including modifications or exclusions. 2.1.1 "Document References" listed below must be obtained by the Contractor. Ordering information is included as an attachment to this contract/purchase order. DRAWING DATA=5528070 |53711| -|FN |D| | | | DRAWING DATA=5854957 |53711| F| |D| | | | DRAWING DATA=5854957 |53711| N|FN |D| | | | DRAWING DATA=5854957 |53711| D|PL |D| | | | DRAWING DATA=5855458 |53711| D| |D| | | | DRAWING DATA=5855458 |53711| D|FN |D| | | | DRAWING DATA=5855458 |53711| D|PL |D| | | | DRAWING DATA=5855459 |53711| E| |D| | | | DRAWING DATA=5855459 |53711| E|FN |D| | | | DRAWING DATA=5855459 |53711| E|PL |D| | | | DRAWING DATA=5855516 |53711| B| |D| | | | DRAWING DATA=5855516 |53711| B|FN |D| | | | DRAWING DATA=5855516 |53711| B|PL |D| | | | DRAWING DATA=6113555 |53711| A| |D| | | | DRAWING DATA=6113555 |53711| A|FN |D| | | | DRAWING DATA=6113555 |53711| A|PL |D| | | | DRAWING DATA=6113556 |53711| A| |D| | | | DRAWING DATA=6113556 |53711| A|FN |D| | | | DRAWING DATA=6113556 |53711| A|PL |D| | | | DRAWING DATA=6113659 |53711| C|FN |D| | | | DRAWING DATA=6113659 |53711| C|PL |D| | | | DRAWING DATA=6509040 |53711| -| |D| | | | DRAWING DATA=6509040 |53711| -|FN |D| | | | DRAWING DATA=6509986 |53711| -| |D| | | | DRAWING DATA=6509986 |53711| -|FN |D| | | | DRAWING DATA=6509989 |53711| -| |D| | | | DRAWING DATA=6509989 |53711| -|FN |D| | | | DOCUMENT REF DATA=MIL-STD-129 | | |P |041029|A| |03| DOCUMENT REF DATA=ISO9001 | | | |010417|A| | | DOCUMENT REF DATA=MIL-STD-973 | | | |950113|A| |03| 3. REQUIREMENTS 3.1 Cage Code/Reference Number Items - The TEST SET SUBASSEMBL repaired under this contract/purchase order shall meet the operational and functional requirements as represented by the Cage Code(s) and reference number(s) listed below. All repair work shall be performed in accordance with the contractors repair/overhaul standard practices, manuals and directives including but not limited to drawings, technical orders, manufacturing operations, tooling instructions, approved repair standards and any other contractor or government approved documents developed to provide technical repair procedures. CAGE___Ref. No. ;53711 5855459; 3.2 Marking - This item shall be physically identified in accordance with ;MIL-STD-129; . 3.3 Changes in Design, Material Servicing, or Part Number - Except for a Code 1 change, which shall be processed as provided in the code statement shown below, no substitution of items shall be made until the NAVICP-MECH Contracting Officer has notified and approval has been given by issuance of a written change order. When any change in design, material, servicing or part number is made to replace or substitute any item to be furnished on this contract/purchase order, the Contractor shall furnish, for the substituting/replacement item, a drawing and an explanation of the reason for the change, explaining the reason therefor. If finished detail drawings are not available, shop drawings in the form used by the manufacturer will be acceptable for Government evaluation. When notifying the Procurement Contracting Officer of the reasons for making substitutions, the type of change shall be indicated by code number in accordance with one of the following statements: Code 1: PART NUMBER CHANGE ONLY - If the Manufacturer's Part Number indicated thereon has changed, but the parts are identical in all respects, supply the item and advise NAVICP-MECH immediately of the new part number. Code 2: Assembly (or set or kit) not furnished - Used following detail parts. Code 3: Part not furnished separately - Use assembly. Code 4: Part redesigned - Old and new parts are completely interchangeable. Code 5: Part redesigned - New part replaces old. Old part cannot replace new. Code 6: Part redesigned - Parts not interchangeable. 4. QUALITY ASSURANCE 4.1 Responsibility for Inspection - Unless otherwise specified in the contract/purchase order, the Contractor is responsible for the performance of all inspection requirements as specified herein. Except as otherwise specified in the contract/purchase order, the Contractor may use his own or any other facilities suitable for the performance of the inspection requirements specified herein, unless disapproved by the Government. The Government reserves the right to perform any of the inspections set forth in the specification where such inspections are deemed necessary to assure supplies and services conform to prescribed requirements. 4.2 Responsibility for Compliance - All items must meet all requirements of this contract/purchase order. The inspection set forth in this specification shall become a part of the Contractor's overall inspection system or quality program. The absence of any inspection requirements shall not relieve the Contractor of the responsibility of assuring that all products or supplies submitted to the Government for acceptance comply with all requirements of the contract/purchase order. Sampling in quality conformance does not authorize submission of known defective material, either indicated or actual, not does it commit the Government to acceptance of defective material. 4.3 Records - Records of all inspection work by the Contractor shall be kept complete and available to the Government during the performance of contract/purchase order and for a period of 365 calendar days after final delivery of supplies. 4.4 Quality Conformance Inspection - The contractor is responsible for conducting a Quality Conformance Inspection in accordance with ;drawings 6509986, 6509040, 6509989; , paragraph ;notes 6 & 7; and preparing an inspection report in accordance with the Contract Data Requirements List, DD Form 1423. 4.5 Inspection/Testing Repaired Items - The Contractor shall perform all inspection and testing requirements as specified in the original manufacturer's specifications and drawings. 5. PACKAGING 5.1 Preservation, Packaging, Packing and Marking - Preservation, Packaging, Packing and Marking shall be in accordance with the Contract/Purchase Order Schedule and as specified below. MIL-STD 2073 PACKAGING APPLIES AS FOUND ELSEWHERE IN THE SCHEDULE 6. NOTES 6.1 Ordering Information for Document References - The Department of Defense Single Stock Point (DODSSP), Website http://www.dsp.dla.mil/, provides product information for the Department Of Defense Index Of Specifications and Standards (DODISS) (i.e.Military/Federal Specifications and Standards), Data Item Descriptions (DIDs), and other DODSSP Products. Most Specifications can obtained directly from http://quicksearch.dla.mil/ A. Availability of Cancelled Documents - The DODSSP offers cancelled documentsthat are required by private industry in fulfillment of contractual obligationsin paper format. Documents can be requested by phoning the Subscription Services Desk. B. Commercial Specifications, Standards, and Descriptions - These specifications, standards and descriptions are not available from Government sources. Theymay be obtained from the publishers of the applicable societies. C. Ordnance Standards (OS), Weapons Specifications (WS), and NAVORD OSTD 600 Pages - These type publications may be obtained by submitting a request to: Commander, Indian Head Division, Naval Surface Warfare Center Code 8410P, 101 Strauss Avenue Indian Head, MD 20640-5035 D. On post-award actions, requests for "Official Use Only" and "NOFORN" (Not Releasable To Foreign Nationals) documents must identify the Government ContractNumber, and must be submitted via the cognizant Defense Contract Management Command (DCMC) for certification of need for the document. On pre-award actions such requests must be submitted to the PCO for certification of need for the document. E. NOFORN Military Specifications and Standards (including Amendments, Change Notices and Supplements, but NOT interim Changes) to be ordered from: Contracting Officer NAVSUP-WSS Code 87321 5450 Carlisle Pike P.O. Box 2020 Mechanicsburg, Pa. 17055-0788 F. Nuclear Reactor Publications Assigned NAVSEA Documents and Identification Numbers (i.e. NAVSEA Welding Standard, NAVSEA 250-1500-1) are to be ordered enue: Commanding Officer NAVSUP-WSS Code 009 5450 Carlisle Pike P.O. Box 2020 Mechanicsburg, Pa. 17055-0788 G. Technical Manuals Assigned NAVSEA Identification Numbers (i.e. NAVSEA Welding And Brazing Procedure, NAVSEA S9074-AQ-GIB-010/248) are to be ordered from: Commanding Officer NAVSUP-WSS Code 1 Support Branch 700 Robbins Avenue Philadelphia, Pa. 19111-5094 H. Interim Changes and Classified Specifications must be obtained by submitting a request on DD Form 1425 to NAVSUP-WSS. 6.2 In accordance with OPNAVINST 5510.1 all documents and drawings provided by the U.S. Navy to perspective Contractors must include a "Distribution Statement" to inform the contractor of the limits of distribution, and the safeguarding of the information contained on those documents and drawings. There are 7 (seven) seperate distribution statement codes used for non-classified documents and drawings. The definition for each is as follows: A... approved for public release; distribution is unlimited. B... distribution authorized to US Governments agencies only. C... distribution authorized to US Government agencies and their contractors. D... distribution authorized to DoD and DoD contractors only. E... distribution authorized to DoD Components only. F... further distribution only as directed by Commander, Naval Sea Systems Command, code 09T. X... distribution is authorized to US Government agencies and private individuals or enterprises eligible to obtain export controlled technical data in accordance with OPNAVINST 5510.161. 6.3 Notice To Distributors/Offerors - Consideration for award of contract shall be given only to authorized distributors of the original manufacturer's item represented in this solicitation. If you desire to be considered as a potential source for award of this contract, proof of being an authorized distributor shall be provided on company letterhead signed by a responsible company official and sent with your offer to the Procurement Contracting Officer. DATE OF FIRST SUBMISSION=ASREQ ;The contractor shall prepare a production Lot Quality Conformance Test Plan IAW note 7 of DWG 6509986 AND 6509989 and note 6 of DWG 6509040 and submit for Approval. Approval of the plan is required prior to commencing production. NUWC Newport, N66604, is the Acceptor in WAWF for this CDRL. ; DATE OF FIRST SUBMISSION=ASREQ ;VENDOR SHALL CONDUCT QUALITY CONFORMANCE TESTING TO VERIFY COMPLETED ITEM MEETS OR EXCEEDS REQUIREMENTS OF VICD 7609476. TWO (2) COPIES OF THE QUALITY CONFORMANCE TEST RESULTS ARE REQUIRED PER UNIT DELIVERED TO THE GOVERNMENT. ONE WILL ACCOMPANY THE ASSEMBLY AND THE OTHER SHALL BE FORWARDED TO THE ISEA, NUWC NEWPORT. CONTRACTS WITH MULITIPLE ORDERS, UPON REQUEST AND APPROVAL OF THE PCO, BATCH THE TEST RESULTS FROM A SINGLE PRODUCTION RUN AND SUBMIT A CONSOLIDATED REPORT TO THE ISEA. REPORTS SHIPPED WITH UNITS SHALL BE INSIDE THE PACKAGING. "NUWC Newport, N66604, is the acceptor in WAWF for this CDRL.";

Documents

No documents are listed for this notice.

Contacts

Points of contact as published on the notice.

Timeline & history

Show 6 earlier events
  1. Solicitation posted

  2. Solicitation posted

  3. Solicitation posted

  4. Solicitation posted

  5. Solicitation posted

  6. Solicitation posted

  1. Solicitation posted

  2. Solicitation posted

  3. Solicitation posted

  4. Solicitation posted

  5. Solicitation posted

  6. Solicitation posted

  7. Responses dueNext · in 8 days

  8. Archive date on the official notice

Federal award history

Market context

Department of the Navy · NAICS 333998 · FY24–FY26

Typical award (over $25K)
$92.2K
Contracts awarded
965
Total obligated
$217.8M
Award size, Department of the Navy · NAICS 333998 contracts, FY24–FY26 (log scale)
P25 $5.3KMedian $24.1KP75 $91.3KP90 $284.5K

Largest recipients in this market

  • RAYTHEON COMPANY$44.0M20%
  • EVAC NORTH AMERICA INC$43.8M20%
  • TREADWELL CORPORATION (DELAWARE)$8.6M4%

Recipients of past awards in this market, not the incumbent of this RFP.

View as table
Fiscal yearObligated ($)
FY20220
FY202347,918,299.94
FY202469,758,431.11
FY202597,873,234.54
FY202650,191,398.34

Federal contract award records, award types A–D, FY24–FY26. Updated Nov 13, 2026.

Similar open RFPs

Same NAICS group or Supplies, Equipment & Furniture, nearby first, ranked by score.

Strong

Pump, Reciprocating

Defense Logistics Agency

FederalSolicitationSupplies, Equipment & Furniture
Posted Nov 17Due Dec 17, 2026, 4:30 PM AST (in 28 days)Federal notice
Strong

Seal Assembly, Shaft, SP

Defense Logistics Agency

FederalRFQHUBZone set-asideSupplies, Equipment & Furniture+1
Posted Nov 17Due Nov 30, 2026 (in 12 days)Federal notice
Strong

Compressor, Rotary

Defense Logistics Agency

FederalSolicitationSupplies, Equipment & Furniture
Posted Nov 12Due Dec 17, 2026, 4:30 PM AST (in 28 days)Federal notice
Strong

Luff Hoist RRL & LRL Wire ropes

Defense Logistics Agency · Kittery, ME

FederalRFQSmall business set-asideSupplies, Equipment & Furniture+1
Posted Nov 17Due Nov 30, 2026, 1:00 PM EST (in 11 days)Federal notice
Strong

Filter Element, Fluid

Defense Logistics Agency

FederalRFQSmall business set-asideSupplies, Equipment & Furniture+1
Posted Nov 15Due Nov 30, 2026 (in 12 days)Federal notice

RFP Detector Scores are informational.How we score →

More from Department of the Navy

1352 open RFPs from this issuer and its offices.

Poor

Usns Cody (T-Epf 14) Mta

Department of the Navy

FederalRFPSupplies, Equipment & Furniture
Posted Oct 20Due Nov 19, 2026, 10:00 AM GMT+3 (in 1 h)Federal notice
Fair

Tanker Voyage Charter

Department of the Navy

FederalSources soughtTransportation, Fleet & Logistics
Posted Nov 12Due Nov 19, 2026, 11:00 AM EST (in 10 h)Federal notice

RFP Detector Scores are informational.How we score →

About this notice

Official federal notice. Updated Oct 28, 2026.

Official solicitation:Sign in free to open the official solicitation

RFP Detector is an independent service and is not affiliated with any government agency. Scores are informational.

RFP Detector is not affiliated with the organization that issued this RFP. Always rely on the official notice and confirm every date and requirement with the issuer.