Skip to content

Handbook 1Chapter 7 of 8

The Bid/No-Bid Decision: A Practical Framework

A repeatable way to decide which RFPs deserve your time: knock-out questions, a weighted 100-point scorecard, a scored example, red flags and a checklist you can print.

16 min readUpdated Beginner

Key takeaways

  • Bidding less but better beats bidding on everything: every proposal costs hours you could spend on a bid you can win.
  • Run pass/fail knock-out questions first, then score only the RFPs that survive.
  • Score eight weighted criteria to 100 points: 70+ bid, 55–69 bid only if named gaps get fixed, under 55 pass or team.
  • The public RFP Detector Score rates how attractive and workable an RFP is; your private Fit score rates how well it matches you. Neither predicts a win.
  • Record a reason every time you pass, and review those reasons each quarter.

The bid/no-bid decision is the moment you decide whether an RFP is worth the days a compliant proposal takes. Make it on gut feel and you chase long shots while strong opportunities get rushed. This chapter gives you a practical bid/no-bid decision framework for any government, education, nonprofit or private RFP: ten-minute knock-out questions, a weighted eight-criterion scorecard, a scored example, the red flags that should stop you, and a printable checklist.

Why a disciplined bid/no-bid decision raises your win rate

A proposal is an investment of reading, writing, pricing and chasing references, usually done while delivering paid work. In a small business that bid and proposal (B&P) cost comes out of the owner's evenings and the team's billable hours.

Your win rate is wins divided by bids. You can raise it by winning more of what you bid, or by no longer bidding on what you were never going to win. The second is faster and cheaper, and experienced capture leaders agree: spot likely losses early, walk away, and put the time into fewer, stronger proposals.

  • Better proposals. Selective teams tailor every section to the evaluation criteria instead of copying and pasting.
  • Better reputation. A rushed, generic response tells a buyer you don't understand its needs, and buyers remember.
  • Better data. Scored, recorded decisions show which agencies, sizes and scopes you actually win.
Key terms
Bid/no-bid (go/no-go)

A structured decision on whether to respond to a solicitation, made before you invest in the proposal.

Pwin

Probability of win: your honest estimate of your chance of winning a specific bid.

Incumbent

The company performing the work under the current contract.

Recompete

A new solicitation for work already under contract, issued as that contract nears its end.

Set-aside

A contract reserved for a class of bidders, such as small or certified minority-, women- or veteran-owned firms.

Wired

Slang for a solicitation written, deliberately or not, so that one vendor is the natural winner.

When should you make the bid/no-bid decision? Three gates

Treat bid/no-bid as three short decisions, each with one question and a clear output.

The three decision gates
  1. Gate 1 · Forecast or early notice

    Pursue or ignore?

    Is this our kind of work, for a buyer we want, at a size we can handle? If yes, watch it, talk to the buyer while you can and line up partners. See procurement forecasts and early intelligence.

  2. Gate 2 · Within 2–3 business days of release

    Bid or no-bid?

    Read the whole package, run the knock-outs and score it. Output: bid, bid with conditions, or no-bid, with a named owner.

  3. Gate 3 · After answers and amendments

    Confirm the bid

    Answers and amendments can change requirements, scope or the deadline. If a Gate 2 condition was not met, this is the cheapest moment to stop.

  4. Any time · Material change

    Re-open the decision

    A lost key person, a partner who drops out or a new mandatory requirement can flip the answer. Re-score; don't let sunk hours decide.

Step 1: Knock-out questions to answer before you score

Some requirements are pass/fail, so check them first. The answers sit in the instructions, eligibility section and terms (see how to read and shred an RFP).

Knock-out questions (any “no” stops the bid or turns it into a teaming decision)0 of 8 done

A “no” does not always mean walking away. If a partner holds the missing certification, license or capacity, join a team instead: see how to find prime contractors.

Step 2: The weighted bid/no-bid scoring matrix

Score each of the eight criteria from 1 (weak) to 5 (strong). Weighted points = weight × score ÷ 5, so a criterion weighted 20 that scores 4 earns 16. Weights total 100, giving a score you can compare across opportunities. Score risk inversely: 5 means low risk.

Bid/no-bid scorecard: criteria and default weights
Bid/no-bid scorecard: criteria and default weights
CriterionWeightKey question
Customer relationship15Do we know this buyer, its problems and its decision-makers?
Requirements fit20Can we do this work well, as written, without stretching?
Competition and incumbent15Who else will bid, and can we beat them?
Past performance15Can we prove we have done this, recently, at this size?
Price and margin10Can we price to win and still make money?
Resources and timeline10Do we have people to write it now and deliver it later?
Risk (inverse)10What could hurt us if we win?
Strategic value5Does winning move the business forward beyond this contract?
Decision bands
Decision bands
TotalDecisionNext step
70–100BidAssign an owner and schedule; start the compliance matrix today.
55–69Bid with conditionsName the two or three gaps, each with an owner and deadline; stop if they are not fixed.
Below 55No-bidPass or seek a subcontracting role; record why and note when the contract ends.

How to score each criterion: what 1, 3 and 5 look like

Two people should give the same opportunity roughly the same score. Use these anchors and have two people score independently.

Scoring anchors
Scoring anchors
Criterion1 = weak3 = moderate5 = strong
Customer relationshipNever met the buyer; first heard of it at releaseMet at an event or answered its RFIWorked for this office or had real pre-RFP talks
Requirements fitCore tasks need new staff or a partnerOne secondary gap a partner coversExactly what you do every week, at this scale
Competition and incumbentEntrenched, well-regarded incumbent or specs written for one firmMixed incumbent record or many qualified biddersNo incumbent, or a set-aside that narrows the field to firms like you
Past performanceNothing comparableSimilar but smaller or for another customer typeSeveral recent, similar projects with strong references
Price and marginMust price below cost to competeCompetitive at a thin marginCompetitive with a healthy margin
Resources and timelineNo writer; under two weeks for a complex bidTight but workable with overtimeTeam available; ample time
Risk (inverse)Onerous terms, heavy penalties, slow payerOne or two concerns to raise in questionsStandard terms, clear scope, reliable payer
Strategic valueOne-off workUseful referenceOpens a new agency or sets up a larger recompete
  • Competition: Check the incumbent's contract history, agencies and contract end dates on its contractor profile. Repeated renewals mean a hard target.
  • Price: Check how price is evaluated. An invitation for bid usually goes to the lowest responsive, responsible bidder; a best-value RFP lets a stronger approach win (see types of solicitations and pricing strategy).

Worked example: three opportunities, scored

A fictional 22-person IT managed-services firm on Long Island, certified as a New York State MWBE, with strong town and county references and no federal work, scores three RFPs found the same week. Each cell shows score, then weighted points.

Illustrative bid/no-bid scoring (fictional company and opportunities)
Illustrative bid/no-bid scoring (fictional company and opportunities)
Criterion (weight)A: County help desk, 3 years + 2 optionsB: City agency security assessment, 1 yearC: Statewide IT staffing, 5 years
Customer relationship (15)2 → 6.04 → 12.01 → 3.0
Requirements fit (20)4 → 16.05 → 20.02 → 8.0
Competition and incumbent (15)2 → 6.04 → 12.02 → 6.0
Past performance (15)4 → 12.04 → 12.01 → 3.0
Price and margin (10)3 → 6.04 → 8.02 → 4.0
Resources and timeline (10)3 → 6.04 → 8.01 → 2.0
Risk, inverse (10)3 → 6.04 → 8.02 → 4.0
Strategic value (5)4 → 4.03 → 3.04 → 4.0
Total62: bid with conditions83: bid34: no-bid as prime
Strong exampleStrong decision record: Opportunity A (62)

Evidence: No pre-RFP contact (relationship 2). Incumbent of six years, renewed twice per its contractor profile (competition 2). Scope fits except after-hours on-site coverage (fit 4). Four-hour on-site response backed by liquidated damages (risk 3).

Conditions: (1) Ask whether “four hours” means business hours (Dana, by the questions deadline). (2) Confirm the after-hours partner in writing (Luis, five days). (3) Price at target rates above our margin floor (Priya, before pricing review). If any condition fails, we record a no-bid.

Weak exampleWeak decision record: the same opportunity

“Big county contract. The incumbent's been there forever, but we're better. Let's bid.” No scores, evidence, conditions or owner, so nothing tells the team when to stop.

B is the easy yes and gets the best writer first. C fails as a prime bid, but it has strategic value, so the firm offers its MWBE certification and Long Island coverage to the staffing companies likely to prime it: a no-bid turned into a teaming play (see how to approach a prime contractor).

Red flags: when to walk away from an RFP

Two or more of these and the team should have to argue its way back to a bid.

Green lights versus red flags

Green lights

  • Do: You spoke with the buyer before release and the requirements reflect it
  • Do: Evaluation criteria reward strengths you can prove
  • Do: A budget or award history fits your price
  • Do: Three or more weeks for a complex scope
  • Do: Recent, similar, enthusiastic references

Red flags

  • Don't: Specs name a brand or match one firm's product or résumé
  • Don't: A very short window for a complex scope
  • Don't: A long-serving incumbent with no known problems
  • Don't: Price is everything and you are not the low-cost provider
  • Don't: Unlimited liability, heavy penalties or payment terms you cannot finance
  • Don't: Signs it is not openly competed, such as an intent to sole source
  • Don't: Found late: questions closed, mandatory site visit missed

Using the RFP Detector Score and Fit score as inputs

The RFP Detector Score (0–100, graded A to F) is the same for every visitor and answers one question: how attractive and workable is this RFP for a typical qualified bidder, today? Each RFP starts at 50 and six weighted factors move it, each shown with a reason. Your Fit score (0–100) is private to your organization and measures how well the RFP matches your matching profile: NAICS codes, keywords, certifications, service area and contract size. Details are in how the RFP Detector Score works.

Where each signal feeds your scorecard
Where each signal feeds your scorecard
RFP Detector signalScorecard input
Value factor (money on the table)Price and margin; strategic value
Competition & access factor (set-asides, sole-source signals, market concentration)Competition and incumbent
Issuer & market factor (does the issuer buy this work?)Customer relationship; strategic value
Time & stage and Freshness factorsResources and timeline
Clarity & completeness factorRisk: vague scopes are harder to price
Fit: NAICS and keywordsRequirements fit
Fit: eligibility (capped at 25 if a required certification is missing from your profile)Knock-out questions
Fit: geography and contract sizeResources; risk
A 15-minute triage routine in RFP Detector
  1. Step 1: Filter

    On search, filter by NAICS codes and keywords, then set a Minimum score or Minimum grade and a Minimum Fit.

    Tip: A Minimum Fit of 60, the starting value suggested for alerts, is a sensible first setting.
  2. Step 2: Read the breakdown

    Factor contributions and Fit reasons on the RFP page tell you which knock-out to check first.

  3. Step 3: Track the decision

    Save the RFP, move it to Qualifying on your pipeline board, set an owner and record estimated value and win probability. Download the RFP report (PDF) for the go/no-go meeting.

  4. Step 4: Close it out

    Move it to Preparing to bid, or to No bid with a reason such as “strong incumbent” or “bonding limit”. Then set an alert so similar RFPs arrive instantly, daily or weekly.

Screen-by-screen help: tracking bids, pipeline and alerts.

Printable bid/no-bid checklist

Before the meeting0 of 6 done
In and after the meeting0 of 5 done

Template

Bid/no-bid decision record (one page)

The scorecard and decision on one sheet, kept with the opportunity.

When to use it

At Gate 2, within three business days of release, and again at Gate 3 after answers and amendments.

BID/NO-BID DECISION RECORD

Opportunity: [RFP_TITLE]    Solicitation no.: [SOLICITATION_NUMBER]
Issuer: [ISSUER]    Proposal due: [DUE_DATE]
Estimated value: [ESTIMATED_VALUE]    Score / Fit: [SCORE_AND_FIT]
All knock-outs passed? [YES_OR_GAPS]

SCORECARD (score 1-5; points = weight x score / 5)
Criterion                   Weight  Score  Points  Evidence
Customer relationship         15    [S]    [P]     [EVIDENCE]
Requirements fit              20    [S]    [P]     [EVIDENCE]
Competition and incumbent     15    [S]    [P]     [EVIDENCE]
Past performance              15    [S]    [P]     [EVIDENCE]
Price and margin              10    [S]    [P]     [EVIDENCE]
Resources and timeline        10    [S]    [P]     [EVIDENCE]
Risk (5 = low risk)           10    [S]    [P]     [EVIDENCE]
Strategic value                5    [S]    [P]     [EVIDENCE]
TOTAL                        100           [TOTAL]

DECISION: [BID / BID WITH CONDITIONS / NO-BID]
Conditions (owner, due date): [CONDITIONS]
Teaming needs: [TEAMING_NEEDS]
No-bid reason: [NO_BID_REASON]
Recompete watch date: [CONTRACT_END_DATE]
Decided by: [APPROVER_NAME]    Date: [DATE]

Fields to fill in

[SCORE_AND_FIT]
RFP Detector Score and grade plus your Fit, for example “71 B / Fit 78”.
[YES_OR_GAPS]
“Yes”, or the failed knock-outs and how a partner could cover them.
[S] / [P] / [EVIDENCE]
Score 1–5, points = weight × score ÷ 5, and one line of proof.
[CONDITIONS]
For “bid with conditions”: each gap, one owner, one date.
[NO_BID_REASON]
Short and specific, such as “bonding limit” or “found too late”.

Common bid/no-bid mistakes, and how to say no well

  • Bidding because it is there. Your scorecard is the reason to bid, not the RFP's existence.
  • Letting sunk cost decide. Score what winning takes from here.
  • Deciding too late. Late decisions leave no time to write, ask questions or find partners.
  • Ignoring price until the end. Discovering you can't compete at pricing review wastes the whole effort.
  • Not recording no-bids. Without reasons you miss fixable patterns, like a missing certification.

Saying no well keeps doors open. If you have been talking with the buyer, send a short thank-you explaining that this round is not a fit. Some agencies ask listed vendors to return a “no bid” response, so read the instructions. Then note when the contract ends: today's no-bid can start your recompete capture (see capture planning and win themes).

Frequently asked questions

What is a bid/no-bid decision?

A bid/no-bid (or go/no-go) decision is a structured choice about whether to respond to a specific RFP, made before you invest in a proposal. It weighs whether you are eligible, can win, can deliver profitably and gain strategically. A weighted scorecard keeps the decision consistent across opportunities and people.

What criteria should a bid/no-bid decision include?

First, pass/fail knock-outs: eligibility, registrations, licenses, bonding and insurance, minimum experience, mandatory events, time and terms. Then score customer relationship, requirements fit, competition and incumbent, past performance, price and margin, resources and timeline, risk and strategic value, weighted to how you win work.

What is a good bid/no-bid score?

There is no universal number. On a 100-point weighted scorecard, start with 70+ to bid, 55–69 to bid only if named gaps are fixed, and under 55 to pass or team. After a few months, compare scores with results and move the cut-offs.

When should you make the bid/no-bid decision?

In stages, as early as you can: decide whether to pursue when you first see a forecast or early notice, whether to bid within two or three business days of release, and confirm after questions are answered and amendments issued. Re-open the decision whenever a material fact changes.

Should I bid on an RFP I found late?

Only if the scope is exactly what you already do, the remaining time allows a compliant, tailored response, and no mandatory conference or site visit has passed. Missing the questions deadline leaves ambiguities you cannot clarify. Alerts that deliver new matches the day they are posted prevent late discoveries.

Should a small business bid against an incumbent?

Sometimes. Incumbents usually start ahead, but bidding makes sense when the incumbent has performance problems, the requirement has changed, the work has moved to a set-aside you qualify for, or you have a real relationship and a better approach. Research the incumbent's contract history first.

Does a high RFP Detector Score mean I should bid?

No. The RFP Detector Score rates how attractive and workable an RFP is for a typical qualified bidder. It is the same for everyone and is neither a probability of winning nor advice to bid. Combine it with your private Fit score to decide what to read first, then decide with your own scorecard.

Complete handbook

Download the complete handbook (PDF)

All 8 chapters, templates and checklists, ready to print or share.

Put it into practice

Search open RFPs from federal, state, local, education, private and non-profit issuers, each with the RFP Detector Score.

Find RFPs

Free handbooks

Keep learning

All guides and templates