Skip to content

Handbook 5Chapter 5 of 7

Contractor Research: Competitors, Incumbents and Teaming Partners

How to use public contractor profiles, contract histories and the Contractor Score to size up competitors, find the incumbent, choose teaming partners and claim your own company's profile.

15 min readUpdated Beginner

Key takeaways

  • The contractor directory has a public profile for every organization with New York State contracts: contract history, agencies served and a Contractor Score.
  • The Contractor Score (0 to 100) measures public contracting activity on record, not quality. Read the factor breakdown, not just the grade.
  • The contracts table is the evidence: filter by agency and status, then open a row for the term, amount and spending.
  • Use profiles to find the likely incumbent, judge how hard a rebid will be and shortlist teaming partners who already serve your target agency.
  • Claim your company's profile free to add your logo, description and contacts and get a score badge. The score itself always comes from the public record.

Good contractor research tells you who you are really bidding against before you spend a week on a proposal. RFP Detector turns public contract records into searchable contractor profiles: who holds contracts, with which agencies, for how much, for how long and how active they are today. This chapter shows you how to use those profiles for competitor analysis, incumbent research and teaming, and how to read the Contractor Score without over-reading it.

What the contractor directory covers

The contractor directory lists organizations that hold New York State contracts, built from public contract records. Each organization gets one profile however many name variants appear in the records, and each profile shows a Records updated date.

  • Organizations only. Vendors listed under a person's own name get no public page and no score; their contracts still count in agency totals.
  • Company details when matched with confidence. Legal name, website, UEI and CAGE code, industry codes, federal registration and federal award history appear only when the contractor is matched to a registered business, and only business contact information is shown.

How to find a contractor profile

Find any contractor in under a minute
  1. Step 1: Open the directory and search

    Go to Contractors and type in Search contractors by name. Results update as you type. Use a distinctive word (“Hudson Valley”, not “Services Inc”).

  2. Step 2: Sort the list

    Choose Contract value (the default), Contractor Score, Active contracts or Name A–Z. Active contracts surfaces the companies doing the most work right now.

  3. Step 3: Browse by agency, category, type or place

    Open Browse by agency, category, type and place. On an agency list, each contractor's figures are its contracts with that agency, which is exactly what incumbent research needs.

  4. Step 4: Check the leaderboards

    Top contractors ranks organizations by Highest Contractor Score, Largest total contract value, Most active contracts, Most agencies served and Largest newer contractors.

Reading a contractor profile, section by section

What each part of a contractor profile tells you
What each part of a contractor profile tells you
SectionWhat you seeUse it to
Header and headline figuresBadges, location, a summary sentence; Total contract value, Spent to date, Active contracts, Contracts on record, Agencies served, Years activeConfirm the company and gauge how much work is live
Contact & companyLegal name, UEI and CAGE, federal registration, federal award history, NAICS codes, certifications, leadershipCheck identity, codes and certifications
ContractsEvery state contract, active first, with filters and expandable rowsFind the incumbent contract, its end date and spending
Contract-type mix and Contracts over timeValue by contract type; contracts started per yearSee what kind of contractor it is and whether it is growing or quiet
How the Contractor Score adds upEach factor's signed points from a base of 50Understand why the score is what it is
Agencies servedContract value with each agency (top 12)See which buyers trust this company
Open RFPs from these agenciesCurrent RFPs from agencies it already servesFind bids where you will likely meet it
Key factsFirst contract, latest end date, records updated, profile completenessQuick reference (completeness is separate from the score)

What does the Contractor Score measure, and what doesn't it?

The Contractor Score is a 0 to 100 summary of a company's public contracting record with New York State agencies. Everyone starts at 50; eight factors add or subtract points, and the profile shows every contribution. It is computed the same way for every company, it is the same for every visitor, and nobody can pay to change it.

The eight factors (version 1.0.0; full formula on the methodology page)
The eight factors (version 1.0.0; full formula on the methodology page)
FactorWeightWhat it looks at
Contract volume25Total current contract value, on a logarithmic scale
Recent activity20Contracts active today and how recently the latest was approved
Agency breadth15How many different agencies and facilities it serves
Experience15Years since the first contract on record
Contract-type mix10Number of contract types and the share of goods-and-services work
Spending vs. value5Spending on completed contracts vs. value; finishing under value is never a failure
Federal award history6Bonus only, when matched to a registered business
Federal registration4Bonus only: an active federal registration
Grades and labels
Grades and labels
ScoreGradeLabel
80–100AExtensive
65–79BEstablished
50–64CModerate
35–49DLimited
0–34FMinimal

Each score carries a data confidence label: High (75 or more), Medium (50 to 74) or Low. Missing data contributes exactly zero, so gaps lower the confidence without moving the score. Scores are recomputed after every records refresh and at least weekly. Details are on the methodology page.

Reading the score the right way

The score is good for

  • Do: Gauging how much state contracting activity a company has
  • Do: Telling newer or quieter competitors from deeply established ones
  • Do: Asking better questions: why is Agency breadth low?

The score is not

  • Don't: A rating of quality, safety or customer satisfaction
  • Don't: An endorsement or a prediction of who will win
  • Don't: A financial rating (contract value is not revenue)

Reading the contracts table and charts

The contracts table lists every contract with New York State agencies, active first, and gains columns on wider screens: Contract, Agency, Type, Contract no., Start, End, Amount and Spent.

Filter the table to answer one question
  1. Step 1: Pick a status

    Use All, Active or Ended. Active means the end date is today or later.

  2. Step 2: Narrow to one agency and type

    Choose your target buyer in All agencies and, if needed, a contract type in All types.

  3. Step 3: Search the descriptions

    Type a keyword in Search contracts (“help desk”, “HVAC”) to find the contract that matches your RFP.

  4. Step 4: Open the row

    Click a contract for the full description, contract number, term and length, approval date, status, amount and spent to date as a percentage.

Key terms
Spent to date

Spending recorded against the contract so far. Finishing under the full value is common and normal.

Term

Start to end date. Many contracts have renewal options, so the end date on record is the current one, not necessarily the last.

Incumbent / recompete

The company holding the current contract, and the new solicitation that rebids that work.

Contract-type mix shows where a company's value sits (mostly grants is a different competitor from mostly services). Contracts over time shows contracts started each year: a rising line means momentum, a flat recent stretch can mean a company shifting away from state work.

How to research an incumbent before you bid

Incumbent research answers three questions: who does this work today, how strong is that relationship, and when will it be bid again. For the strategy side, pair this with competitor and incumbent analysis.

Incumbent research in five steps
  1. Step 1: Read the RFP's background section

    Rebids often name the current contractor, the prior contract number or a transition requirement.

  2. Step 2: List the agency's top contractors

    Use Top contractors for [agency] on the RFP page, or the agency's full list in the directory.

  3. Step 3: Find the matching contract

    On each likely profile, filter to the agency and Active, and search for the service. The contract whose description and term match is your probable incumbent.

  4. Step 4: Read the term, spending and relationship

    An end date 6 to 12 months out suggests a rebid is near; spending close to the amount means the value is mostly used. A ten-year, multi-contract relationship is harder to displace than a first award.

    Tip: Dates are signals, not promises: renewals, extensions and bridge contracts are common. Confirm timing with procurement forecasts.
  5. Step 5: Score it

    Feed incumbent strength into the weighted bid/no-bid matrix.

Strong exampleWorked example: a help desk rebid (hypothetical)

A 25-person Albany IT firm finds a state agency RFP for help desk support. One of the top contractors holds an active “Help desk and desktop support” contract with that agency: four years old, ending in seven months, 91% spent, plus two other active contracts there and a B grade.

Verdict: a real, well-connected incumbent on a mature contract. The firm still bids, but builds a strong transition plan, asks about service levels in the Q&A window and leads with its faster response times as a discriminator.

Building a competitor profile you can reuse

You will meet the same five to ten competitors again and again. A one-page profile for each, updated quarterly, beats a fresh scramble before every deadline. Fill it from the contractor profile, the company's website, pre-bid meetings and debriefs.

Template

Competitor profile worksheet

A one-page record per competitor, built from their contractor profile and your notes.

When to use it

For every company in the Top contractors list of your target agencies. Update it each quarter and after every debrief.

COMPETITOR PROFILE: [COMPANY NAME]
Last updated: [DATE] by [YOUR NAME]
Profile link: [PROFILE LINK]

1. IDENTITY
Location: [CITY, STATE]   In business since: [YEAR]
NAICS codes: [CODES]
Certifications shown (verify with certifier): [CERTIFICATIONS]

2. STATE CONTRACTING RECORD
Contractor Score: [SCORE] ([GRADE], [LABEL]), confidence [LEVEL]
Total contract value: [AMOUNT]   Active contracts: [NUMBER]
Top agencies: [AGENCY 1], [AGENCY 2], [AGENCY 3]
Federal award history: [AMOUNT OR NOT SHOWN]

3. CONTRACTS THAT OVERLAP WITH OUR WORK
[DESCRIPTION] | [AGENCY] | ends [END DATE] | [AMOUNT] | [PERCENT] spent
[DESCRIPTION] | [AGENCY] | ends [END DATE] | [AMOUNT] | [PERCENT] spent

4. OUR READ
Likely strengths: [STRENGTHS]
Likely gaps: [WEAKNESSES]
Our discriminators: [DISCRIMINATORS]
Would we team with them? [YES/NO AND WHY]

5. RFPS WHERE WE EXPECT TO MEET THEM
[RFP TITLE] due [DATE]

Fields to fill in

[PROFILE LINK]
Copy the profile address from your browser so teammates open the same page.
[SCORE] ([GRADE], [LABEL])
From the Contractor Score card, for example 72 (B, Established), plus the confidence label.
[PERCENT]
Spent to date as a share of the amount, from the expanded contract row.
[DISCRIMINATORS]
Provable differences: certifications, response times, local staff, a method the competitor lacks.
[STRENGTHS] / [WEAKNESSES]
Facts first (relationships, history), then debrief notes. Never infer quality from the score.

Each profile's Open RFPs from these agencies list shows bids where you are likely to meet that competitor. Save them to your pipeline (see Tracking Bids) and plan your pricing with price to win.

Finding teaming partners and subcontractors

The profiles that show you competitors also show you partners: a company that already serves your target agency brings past performance, and one with the certification or specialty the RFP asks for fills a gap. Use both directories.

Two places to find partners
Two places to find partners
Contractor directoryVendor directory
WhereContractorsVendors
What it isPublic contract history for organizations with state contractsFree listings companies publish themselves, any sector or state
Filter byName, agency, category, contract type, placeServices, category, service area, sectors, NAICS, certifications, company size
How to reach themContact & company panel, when details are confirmedThe Connect button (a request to their inbox)
Find and approach a teaming partner
  1. Step 1: Define the gap

    Name exactly what you lack: agency past performance, a license, a certification goal, a region or a specialty.

  2. Step 2: List who serves the agency

    Open the agency's contractor list and sort by Active contracts. Check each profile's NAICS codes, certifications and Contracts over time.

  3. Step 3: Search capabilities

    In Vendors, filter by category, service area and certification. A NAICS prefix works: 5617 matches 561720.

  4. Step 4: Send a connection request

    On the vendor's profile press Connect and write 20 to 1,000 characters naming the RFP and the role. Messaging opens when they accept, and replies arrive in your inbox.

    Tip: You must be signed in with an organization. If you belong to several, pick which one you send as.

Template

Teaming connection request

A first message that fits the 1,000-character Connect box.

When to use it

When you have a specific RFP and role in mind, at least two to three weeks before the due date.

Hello [CONTACT NAME],

I'm [YOUR NAME], [YOUR TITLE] at [YOUR COMPANY]. We are preparing a response to [RFP TITLE] from [AGENCY], due [DUE DATE].

Your work with [AGENCY OR SIMILAR BUYER] and your [CAPABILITY OR CERTIFICATION] stood out. We would like to discuss a [SUBCONTRACT / TEAMING] role covering [SCOPE AREA], about [SHARE OF WORK].

We would lead [YOUR PART OF THE SCOPE] and bring [YOUR KEY STRENGTH].

Could we talk for 20 minutes this week? Reply here or call [YOUR PHONE].

Thank you,
[YOUR NAME]

Fields to fill in

[CAPABILITY OR CERTIFICATION]
Why you chose them: a contract on their profile, a certification, a service area.
[SHARE OF WORK]
An honest estimate, for example “about 25% of the labor” or “all electrical work”.

How to claim your company's contractor profile

If your company holds New York State contracts, it probably has a profile. Claiming is free: it adds a Claimed badge, shows your vendor listing details (logo, description, contacts) first and turns on your Vendor workspace. It does not change your Contractor Score.

Claim a profile
  1. Step 1: Press Claim this profile

    Open your profile from Contractors and press Claim this profile in the Is this your company? card. Signed out? Create a free account or sign in; the app then reminds you to Finish claiming.

  2. Step 2: Verify with a company email

    If the profile shows a company website, enter any address at that domain, press Send code, then enter the 6-digit code and press Verify and claim. The code works for 30 minutes.

  3. Step 3: Or ask for a review

    No email at that domain? Use Ask for a review: give your role and how the team can confirm you represent the company. Claims are reviewed by hand and you are emailed the decision.

  4. Step 4: Finish your listing

    Edit your logo, description and contacts in the listing editor (see Building Your Vendor Profile).

  5. Step 5: Add your score badge

    On the Vendor overview, follow the notice Add your Contractor Score badge to your website to the Contractor profile & badge page, then press Copy HTML for the light or dark version. The badge links to your profile, updates with your score (cached for a day) and has no script or tracking.

Claim troubleshooting0 of 4 done

Common contractor research mistakes

Do

  • Do: Start from a specific RFP and its agency
  • Do: Filter by agency and status before concluding
  • Do: Verify certifications at the source
  • Do: Keep a reusable profile per repeat competitor

Don't

  • Don't: Judge quality from the Contractor Score
  • Don't: Assume an end date is the rebid date
  • Don't: Ignore federal, city and private work
  • Don't: Approach partners with no RFP in hand

Frequently asked questions

How do I find out who currently holds a government contract?

Read the RFP's background section, which often names the current contractor. Then check Top contractors for [agency] on the RFP page, open the likely profiles, filter the contracts table to that agency and Active, and search for the service. The contract whose description and term match is your probable incumbent.

What is the RFP Detector Contractor Score?

A 0 to 100 summary of a company's public contracting activity with New York State agencies. It starts at 50; eight factors (volume, recent activity, agency breadth, experience, contract-type mix, spending vs. value, plus federal bonuses) add or subtract points. Grades run from A (Extensive) to F (Minimal). See the methodology.

Does a high Contractor Score mean a company does good work?

No. It measures how much public contracting activity is on record, not quality, safety or customer satisfaction. It is not an endorsement or a prediction of who will win.

Can I change my company's Contractor Score?

Not directly. It comes from the public record, is calculated the same way for everyone and can't be bought. It changes as your real contracting activity changes and is recomputed at least weekly. Report a wrong record through the contact form.

How do I claim my company's contractor profile?

Open it from Contractors, press Claim this profile, sign in or create a free account, then verify with a 6-digit code sent to an address at your company's website domain, or ask for a manual review. Claiming is free.

Why can't I find a company in the contractor directory?

Profiles cover organizations with New York State contracts. Companies that work only for cities, the federal government or private clients may not have one, and vendors listed under a person's own name get no page. Try a shorter name, then check the vendor directory.

Complete handbook

Download the complete handbook (PDF)

All 7 chapters, templates and checklists, ready to print or share.

Put it into practice

Search open RFPs from federal, state, local, education, private and non-profit issuers, each with the RFP Detector Score.

Find RFPs

Free handbooks

Keep learning

All guides and templates