A strong RFP cover letter will not win a contract on its own, but a careless one can lose points, or the whole bid, before an evaluator reaches page one. The other letters around a bid do quieter work: they put you on the list that receives addenda, confirm that a sealed bid contains everything the buyer asked for, keep the door open when you decline, and introduce your company to purchasing offices before their next solicitation. This chapter gives you an RFP cover letter template and five more copy-ready templates, explains what each letter must say, and shows how to adapt them for construction, IT, professional services and nonprofit bids.
Every template uses [SQUARE_BRACKET] placeholders and comes with a field guide. Copy it, replace every placeholder, then check the result against the solicitation's instructions line by line. For how the cover letter fits into the full proposal package, read Proposal Structure, Formatting and Compliance in the proposal-writing handbook.
Which bid letters do you need, and when do you send each one?
Most small businesses only think about the cover letter. Over the life of one opportunity you may send four or five different letters, to different people, with very different stakes. Knowing which is which keeps you from over-writing the simple ones and under-preparing the one that can disqualify you.
| Letter | When you send it | Who receives it | Typical length | What is at stake |
|---|---|---|---|---|
| Proposal cover letter | With the proposal, as its first page or a separate upload | The contracting officer or evaluation committee named in the RFP | 1 to 2 pages | First impression; may carry required statements and an authorized signature |
| Sealed-bid transmittal letter | Inside the sealed bid package or as the first file uploaded | The purchasing office or bid clerk named in the invitation for bids | 1 page, often on the buyer's form | Can be a responsiveness item: a missing signature or addendum acknowledgment can sink the bid |
| Electronic submission email | When the solicitation allows delivery by email | The designated contact or submission mailbox | Under 1 page | Proof of what you sent and when; a clean record if a file fails to open |
| Letter of intent to bid | After your bid decision, by the intent deadline if one is set | The designated procurement contact | Under 1 page | Usually non-binding; sometimes required to receive addenda or to submit |
| No-bid letter | As soon as you decide not to bid, before the due date | The procurement contact or whoever invited you | Under 1 page | Protects the relationship and your place on the bidders list |
| Bidders list request | Any time, ideally before the buyer's next buying cycle | The purchasing or procurement office | 1 page plus your capability statement | Invitations to quotes and informal bids that are not widely advertised |
- Transmittal letter
A formal letter that accompanies (transmits) a bid or proposal, lists what is enclosed and confirms required statements. Buyers also call it a letter of submittal, offer letter or proposal cover page, and many supply their own form.
- Bidder and offeror
The company submitting the offer. Bidder is the usual word in sealed bidding (invitations for bids); offeror is the usual word in negotiated RFPs. The difference is explained in Types of Solicitations.
- Authorized signatory
A person with legal authority to commit your company to a contract: usually an owner or officer, or someone with written delegation. Many solicitations require the cover letter, bid form or affidavits to be signed by this person.
- Acceptance period (bid validity)
How long your prices and offer stay open for the buyer to accept. The solicitation normally states it. Never shorten it in your letter.
- Addendum (amendment)
A formal change to the solicitation issued before the due date. Buyers often require you to acknowledge each one by number and date.
- Designated contact
The procurement person you may communicate with during the solicitation. In New York State procurements, the Procurement Lobbying Law limits contact during the restricted period to the designated contacts named in the solicitation, and many other buyers have similar rules. See New York State procurement rules for bidders.
- Responsive and responsible
A responsive bid conforms to all material requirements of the solicitation. A responsible bidder is one the buyer judges able to perform (finances, experience, integrity). A non-responsive bid can be rejected without evaluation.
Before you write: what the solicitation may already dictate
Government buyers often prescribe the form, content and signature of the cover letter or transmittal letter. Federal negotiated solicitations commonly include standard instructions requiring the first page of a proposal to show the solicitation number, your name, address and contact details, a statement of the extent to which you agree with the solicitation's terms, the names of the people authorized to negotiate for you, and the name, title and signature of the person authorized to sign.
State and local RFPs frequently attach their own transmittal form instead. When a form exists, use it as written and fill in only the blanks. Some buyers state outright that an unsigned or altered transmittal letter makes the proposal non-responsive. A template is for the many cases where the buyer asks for a cover letter but does not say what goes in it.
RFP cover letter template: how to write one evaluators actually read
Think of the proposal cover letter as a handshake, not a summary. In under a minute it should prove three things: you read the solicitation, you comply with it, and you have a clear reason to be chosen. The detail belongs in the executive summary and the body of the proposal; the next chapters, Executive Summary Templates and Writing a Winning Executive Summary, cover that document.
Keep it to one page if you can and two at most, unless the buyer prescribes a format. Address it to the person or committee the RFP names, never "To Whom It May Concern." Have it signed by an owner or officer who can bind the company, even if someone else drafted it, and make sure its promises match the rest of the proposal word for word.
- Stage 1: Name the opportunity
Exact solicitation title and number, and one sentence of thanks.
- Stage 2: Show you understand the goal
Restate the buyer's outcome in their own words: what must be true when the contract succeeds.
- Stage 3: Confirm compliance
Say the proposal answers every requirement, acknowledge all addenda and confirm the offer validity period.
- Stage 4: Give three reasons
Three short, provable differentiators tied to the evaluation criteria.
- Stage 5: Close with authority
Name the contact authorized to negotiate and sign as someone who can bind the company.
Strong
- Do: Addressed to the named contracting officer or committee, using the exact solicitation title and number
- Do: One sentence of thanks, then straight to the buyer's goal
- Do: Three differentiators backed by numbers, names or credentials
- Do: An explicit compliance statement and addenda acknowledgment
- Do: Signed by an officer, with a direct phone and a monitored email for the contact person
Weak
- Don't: "To Whom It May Concern" and a wrong or missing solicitation number
- Don't: A paragraph of company history that evaluators can find elsewhere in the proposal
- Don't: Adjectives with no proof: world-class, committed to excellence, best in class
- Don't: Exceptions to the terms tucked into the letter instead of where the RFP asks for them
- Don't: Signed by someone who cannot legally commit the company
Template
Standard proposal cover letter
A one-page cover letter for negotiated RFPs from public agencies, nonprofits and private buyers. It follows the five-paragraph structure above and includes the statements federal and most state instructions expect on a proposal's first page.
When to use it
Use it when the solicitation asks for a cover letter or letter of transmittal but does not supply a form. If a form is supplied, use the form instead.
[COMPANY_LETTERHEAD] [DATE] [CONTACT_NAME], [CONTACT_TITLE] [AGENCY_OR_ORGANIZATION_NAME] [DEPARTMENT_OR_OFFICE] [STREET_ADDRESS] [CITY], [STATE] [ZIP] Re: Proposal for [SOLICITATION_TITLE], [SOLICITATION_NUMBER] Dear [SALUTATION] [CONTACT_LAST_NAME]: Thank you for the opportunity to respond to [AGENCY_OR_ORGANIZATION_NAME]'s request for proposals for [SOLICITATION_TITLE]. [COMPANY_LEGAL_NAME] is pleased to submit the enclosed proposal. We understand that [AGENCY_SHORT_NAME] needs [BUYER_OBJECTIVE_IN_ONE_SENTENCE]. As we read the solicitation, success means [MEASURABLE_OUTCOME_1] and [MEASURABLE_OUTCOME_2], delivered [KEY_CONSTRAINT]. Our proposal is built around those outcomes. Our proposal responds to every requirement in the solicitation, including Addenda [ADDENDA_NUMBERS], which we acknowledge. We accept the terms and conditions of the solicitation without exception. [IF_EXCEPTIONS: replace the previous sentence with "Our exceptions to the terms and conditions appear in [EXCEPTIONS_LOCATION], as the solicitation directs."] Our offer remains valid for [VALIDITY_PERIOD] calendar days from the proposal due date. Three reasons [AGENCY_SHORT_NAME] can choose [COMPANY_SHORT_NAME] with confidence: 1. [DIFFERENTIATOR_1]. [PROOF_1] 2. [DIFFERENTIATOR_2]. [PROOF_2] 3. [DIFFERENTIATOR_3]. [PROOF_3] [OPTIONAL_TEAM_OR_CERTIFICATION_SENTENCE] [NEGOTIATOR_NAME], [NEGOTIATOR_TITLE], is authorized to negotiate on our behalf and will be your point of contact for questions and clarifications. [NEGOTIATOR_FIRST_NAME] can be reached at [PHONE] or [EMAIL]. We would welcome the opportunity to [NEXT_STEP]. Thank you for your consideration. Sincerely, [SIGNATURE] [SIGNER_NAME] [SIGNER_TITLE] [COMPANY_LEGAL_NAME] [COMPANY_ADDRESS] [IDENTIFIER_LABEL]: [IDENTIFIER]
Fields to fill in
- [COMPANY_LETTERHEAD]
- Your logo, legal name, address, phone and website. Use the legal name exactly as registered with the buyer.
- [CONTACT_NAME], [CONTACT_TITLE]
- The designated contact or evaluation committee chair named in the RFP. If none is named, address the procurement office by title.
- [SOLICITATION_TITLE], [SOLICITATION_NUMBER]
- Copy both exactly from the solicitation cover page, including punctuation and prefixes.
- [BUYER_OBJECTIVE_IN_ONE_SENTENCE]
- The outcome the buyer wants, in its words, e.g. "a reliable custodial program that keeps five elementary schools inspection-ready."
- [MEASURABLE_OUTCOME_1], [MEASURABLE_OUTCOME_2]
- Results tied to the scope or evaluation criteria, e.g. "100% of work orders closed within 48 hours."
- [KEY_CONSTRAINT]
- The condition that matters most to the buyer, e.g. "without disrupting classes" or "within the grant period ending June 30."
- [ADDENDA_NUMBERS]
- Every addendum issued, by number (e.g. "1 through 3"). If none were issued, say so.
- [EXCEPTIONS_LOCATION]
- Only if you take exceptions: the section or form where the RFP tells you to list them.
- [VALIDITY_PERIOD]
- The acceptance period the solicitation requires, or longer. Never shorter.
- [DIFFERENTIATOR_1] to [DIFFERENTIATOR_3]
- Your three win themes, each one short phrase, e.g. "Two-hour emergency response."
- [PROOF_1] to [PROOF_3]
- One sentence of evidence each: a metric, a named client, a credential or a commitment the proposal backs up.
- [OPTIONAL_TEAM_OR_CERTIFICATION_SENTENCE]
- Certifications you currently hold or key teaming partners, e.g. "[COMPANY] is a New York State certified WBE, and our team includes [PARTNER], a certified SDVOB, for [SCOPE]." Delete if not relevant.
- [NEGOTIATOR_NAME], [NEGOTIATOR_TITLE]
- The person authorized to negotiate and answer clarifications. Give a direct line and an inbox someone checks daily during evaluation.
- [NEXT_STEP]
- A modest, relevant offer, e.g. "present our approach at an oral presentation" or "walk the sites with your facilities team."
- [SIGNER_NAME], [SIGNER_TITLE]
- An owner or officer authorized to bind the company.
- [IDENTIFIER_LABEL]: [IDENTIFIER]
- The identifier the buyer uses, e.g. "UEI" for federal work, a state vendor ID, or a city vendor number.
Re: Proposal for Custodial Services, Five Elementary Schools, RFP 2026-14
“We understand that the District needs a custodial program that keeps five elementary buildings clean, safe and inspection-ready without disrupting the school day. As we read the RFP, success means every classroom cleaned to the specification nightly and every urgent work order answered within two hours.
Three reasons the District can choose Brightwater with confidence: 1. Two-hour emergency response. Our supervisor is based eight miles from the farthest school, and we averaged 74 minutes on urgent calls for two neighboring districts last year. 2. Green cleaning that passes inspection. Every product we propose meets the state's green cleaning requirements for schools, and our staff are trained on them annually. 3. Stable crews. Our current school crews have worked together for an average of six years, so your buildings get people who know them.”
Why it works: exact solicitation reference, the buyer's goal in the buyer's terms, and three claims a reader can verify. (Brightwater is a fictional company; the figures are illustrative.)
“Founded in 1998, Brightwater is a full-service, family-owned facilities company committed to excellence and customer satisfaction. We are proud to have served hundreds of satisfied clients across the region and believe our world-class team is uniquely qualified to exceed your expectations.”
Why it loses: no solicitation reference, nothing about the District's need, and every claim is an adjective. An evaluator learns nothing they could score.
Transmittal letters for sealed bids: the formal version
Sealed bidding, through an invitation for bids (IFB), is formal by design. Bids are opened publicly at a set time, prices are read aloud or posted, and award usually goes to the lowest responsive, responsible bidder. There is little room to fix mistakes after opening, so the transmittal letter works as a signed checklist: it tells the bid clerk what is in the envelope and confirms the statements the invitation requires.
Timing is unforgiving. Under the federal sealed-bidding rules (FAR Part 14), a bid received after the exact time set for opening is late and is considered only in narrow cases, such as evidence that it was already under government control before the deadline. State and local rules are similar and often stricter. Deliver a day early, and if you hand-deliver, get a time-stamped receipt. Submission logistics covers the rest of delivery day.
Step 1: Use the buyer's bid form
Complete every blank on the official bid or price form exactly as the invitation directs. If a line does not apply, write what the instructions allow (for example "No Bid" or "N/A") rather than leaving it empty.
Step 2: Acknowledge every addendum
List each addendum by number and date on the bid form and in your transmittal letter, and sign any acknowledgment forms the buyer issued. An addendum that changes quantities or drawings and goes unacknowledged is a classic reason for rejection.
Step 3: Add bid security if required
Include the bid bond, certified check or other security in the exact form and amount the invitation requires. A missing or defective bid security is a common reason a low bid is thrown out.
Tip: Ask your surety for the bid bond at least a week before the due date. Bonding, Insurance and Compliance Requirements explains how bonding works.Step 4: Sign as an authorized officer
Many invitations require the bid and its affidavits (for example a non-collusive bidding certification or a vendor responsibility form) to be signed by an officer, and some require notarization. Match the signer to your corporate authority.
Step 5: Label the envelope exactly
Mark the outer envelope with what the invitation requires, typically your company name and address, the bid number, the bid title, and the opening date and time. Several New York agencies warn that a mislabeled envelope may be refused or opened early, which can compromise confidentiality.
Step 6: Deliver early and keep proof
Use a delivery method that produces a time-stamped receipt. For electronic submissions, upload well before the deadline, download the confirmation and save it with your bid file.
Template
Transmittal letter for a sealed bid
A formal one-page transmittal for invitations for bids and other sealed, publicly opened bids. Numbered paragraphs make it easy for a bid clerk to confirm each required item.
When to use it
Use it for sealed bids from cities, counties, school districts, authorities, state agencies and federal IFBs when the buyer asks for a transmittal or cover letter but provides no form. Place it on top of the bid form inside the sealed envelope, or upload it first.
[COMPANY_LETTERHEAD] [DATE] [PURCHASING_OFFICER_NAME], [PURCHASING_OFFICER_TITLE] [AGENCY_NAME], [PURCHASING_OFFICE] [BID_DELIVERY_ADDRESS] [CITY], [STATE] [ZIP] Re: Sealed Bid for [BID_TITLE], Bid No. [BID_NUMBER], Opening [OPENING_DATE] at [OPENING_TIME] Dear [SALUTATION] [LAST_NAME]: [COMPANY_LEGAL_NAME] ("Bidder") submits the enclosed sealed bid in response to Invitation for Bids No. [BID_NUMBER] for [BID_TITLE]. 1. Contents. This package contains: a. Bid Form and Price Schedule, signed ([NUMBER_OF_PAGES] pages) b. Bid security: [BID_SECURITY_TYPE] in the amount of [BID_SECURITY_AMOUNT], issued by [SURETY_OR_BANK] c. Required forms and certifications: [LIST_OF_REQUIRED_FORMS] d. Other required documents: [LIST_OF_OTHER_DOCUMENTS] e. [NUMBER_OF_COPIES] copies and [ELECTRONIC_COPY_FORMAT] 2. Addenda. Bidder acknowledges receipt of the following addenda and has included their requirements in this bid: Addendum No. [ADDENDUM_NUMBER] dated [ADDENDUM_DATE]; Addendum No. [ADDENDUM_NUMBER] dated [ADDENDUM_DATE]. 3. Terms. Bidder has read the Invitation for Bids, including its specifications, terms and conditions, and agrees to furnish the [GOODS_OR_SERVICES] at the prices stated on the Bid Form. 4. Bid validity. This bid remains firm for [VALIDITY_DAYS] calendar days after the bid opening date, or for any longer period the Invitation for Bids requires. 5. Identification. Federal employer identification number: [EIN]. [STATE_OR_CITY_VENDOR_ID_LABEL]: [VENDOR_ID]. Unique Entity ID (federal and federally funded bids only): [UEI]. Certification status: [CERTIFICATION_AND_NUMBER_OR_NONE]. 6. Authority. The undersigned is the [SIGNER_TITLE] of Bidder and is authorized to sign this bid and bind Bidder to its terms. 7. Contact. Questions about this bid may be directed to [CONTACT_NAME], [CONTACT_TITLE], at [PHONE] or [EMAIL]. Respectfully submitted, [COMPANY_LEGAL_NAME] By: ______________________________ [SIGNER_NAME], [SIGNER_TITLE] Date: [SIGNATURE_DATE] [NOTARY_BLOCK_IF_REQUIRED]
Fields to fill in
- [PURCHASING_OFFICER_NAME], [PURCHASING_OFFICE]
- The office and person named in the invitation for receipt of bids. Use the delivery address for bids, which is often different from the agency's main address.
- [OPENING_DATE], [OPENING_TIME]
- Copy from the invitation or the latest addendum; addenda often move the opening date.
- [BID_SECURITY_TYPE], [BID_SECURITY_AMOUNT]
- For example "bid bond" and "5% of the base bid," exactly as required. Delete item 1b if no security is required.
- [LIST_OF_REQUIRED_FORMS]
- Every form the invitation lists, in its order, e.g. non-collusive bidding certification, vendor responsibility questionnaire, M/WBE utilization plan, insurance certificate.
- [NUMBER_OF_COPIES], [ELECTRONIC_COPY_FORMAT]
- The original plus copies required, and any USB or PDF copy the invitation asks for. Delete item 1e if not required.
- [ADDENDUM_NUMBER], [ADDENDUM_DATE]
- Repeat the pair for each addendum. If none were issued, write "Bidder confirms that no addenda were issued as of [DATE]."
- [GOODS_OR_SERVICES]
- The short description used on the bid form, e.g. "road salt" or "HVAC maintenance services."
- [VALIDITY_DAYS]
- The bid validity period stated in the invitation, or longer.
- [EIN], [VENDOR_ID], [UEI]
- Your federal tax ID, the buyer's vendor number (e.g. NYC PASSPort vendor number, New York State vendor ID, NJSTART vendor ID) and your Unique Entity ID if the work is federal or federally funded. Delete lines that do not apply.
- [CERTIFICATION_AND_NUMBER_OR_NONE]
- Only certifications you currently hold, with certifying agency and number, e.g. "NYS-certified MBE, Empire State Development, No. [NUMBER]."
- [SIGNER_NAME], [SIGNER_TITLE]
- An officer with authority to bind the company. Sign in the ink color or digital format the invitation requires.
- [NOTARY_BLOCK_IF_REQUIRED]
- Only if the invitation requires a notarized bid or affidavit. Use the notary acknowledgment form for your state.
Template
Electronic submission email
A short covering email for proposals the buyer allows you to submit by email. It creates a clean record of what you sent, when, and in how many files.
When to use it
Use it only when the solicitation permits email delivery. Attach your signed cover letter and proposal volumes; this email does not replace the cover letter. For portal submissions, follow the portal's own steps instead.
Subject: [SOLICITATION_NUMBER] Proposal Submission: [SOLICITATION_TITLE] from [COMPANY_SHORT_NAME] Dear [CONTACT_NAME]: On behalf of [COMPANY_LEGAL_NAME], I am submitting our proposal in response to [SOLICITATION_TITLE], [SOLICITATION_NUMBER], due [DUE_DATE] at [DUE_TIME] [TIME_ZONE]. As required by [INSTRUCTIONS_SECTION], the following files are attached: 1. [FILE_NAME_1] ([VOLUME_1_DESCRIPTION], [PAGE_COUNT_1] pages) 2. [FILE_NAME_2] ([VOLUME_2_DESCRIPTION]) 3. [FILE_NAME_3] ([VOLUME_3_DESCRIPTION]) The attachments total [TOTAL_SIZE_MB] MB. [IF_SPLIT: This is email [X] of [Y]; the remaining files follow in separate messages sent within the next few minutes.] We acknowledge Addenda [ADDENDA_NUMBERS]. Please confirm receipt by reply. If any file does not open or arrives incomplete, please contact me directly at [PHONE], and we will resend it immediately and before the deadline where possible. Thank you, [SENDER_NAME] [SENDER_TITLE], [COMPANY_LEGAL_NAME] [PHONE] | [EMAIL]
Fields to fill in
- [SOLICITATION_NUMBER], [SOLICITATION_TITLE]
- Put the number first in the subject line so it sorts correctly in a crowded procurement inbox.
- [DUE_DATE], [DUE_TIME], [TIME_ZONE]
- Copy from the solicitation or latest addendum, e.g. "December 4, 2026 at 2:00 PM ET."
- [INSTRUCTIONS_SECTION]
- The section that sets submission rules, e.g. "Section 4.2, Proposal Submission."
- [FILE_NAME_1] to [FILE_NAME_3]
- Use the file names the RFP requires. If none are required, use CompanyName_SolicitationNumber_Volume.pdf.
- [TOTAL_SIZE_MB]
- Check the buyer's attachment limit before you send. Many mail systems reject large messages without telling you.
- [IF_SPLIT]
- Only if the files must go in more than one email. Number every message.
- [ADDENDA_NUMBERS]
- All addenda issued, by number.
Letter of intent to bid: when it matters and what to include
A letter of intent to bid (sometimes called a notice of intent to propose) tells the buyer you plan to submit. Buyers use these letters to gauge competition, plan the pre-bid conference and site visits, and know who should receive addenda. In most solicitations the letter is non-binding: you can still decide not to bid.
Read the wording carefully, though. Some solicitations make a notice of intent mandatory, either to receive addenda and answers to questions or to be eligible to submit at all, and a missed intent deadline can end your bid before it starts. Add the intent deadline to your bid calendar the day you decide to pursue.
Send it after a real decision (the bid/no-bid framework gives you a scoring method), and keep it short. Questions about the scope do not belong in the letter; submit them through the official question process so the answers are shared with every bidder.
Template
Letter of intent to bid
A short, formal notice that you plan to respond, with a named contact for addenda and optional lines for mandatory pre-bid meetings and identifiers.
When to use it
Use it when the solicitation requests or requires a notice of intent, or as a courtesy on large, multi-phase or long-timeline opportunities where you want to be sure you receive every addendum.
[COMPANY_LETTERHEAD] [DATE] [CONTACT_NAME], [CONTACT_TITLE] [AGENCY_OR_ORGANIZATION_NAME] [ADDRESS] Sent by [DELIVERY_METHOD] Re: Notice of Intent to Bid, [SOLICITATION_TITLE], [SOLICITATION_NUMBER] Dear [SALUTATION] [LAST_NAME]: [COMPANY_LEGAL_NAME] intends to submit a [BID_OR_PROPOSAL] in response to [SOLICITATION_TITLE], [SOLICITATION_NUMBER], due [DUE_DATE]. [OPTIONAL_ONE_SENTENCE_FIT] Please direct all addenda, clarifications, schedule changes and pre-bid meeting information to: [NOTICES_CONTACT_NAME], [NOTICES_CONTACT_TITLE] [EMAIL] [PHONE] [IF_APPLICABLE: We plan to attend the pre-bid conference and site visit on [MEETING_DATE] with [NUMBER] representatives: [ATTENDEE_NAMES].] [IF_REQUIRED: Company identification: EIN [EIN]; [VENDOR_ID_LABEL] [VENDOR_ID]; Unique Entity ID [UEI].] [NON_BINDING_OR_ELIGIBILITY_SENTENCE] We look forward to submitting a complete and compliant response. Sincerely, [SIGNATURE] [SIGNER_NAME] [SIGNER_TITLE] [COMPANY_LEGAL_NAME]
Fields to fill in
- [DELIVERY_METHOD]
- The method the solicitation requires, e.g. "email to the designated contact" or "upload to the bid portal." Delete the line if no method is specified.
- [BID_OR_PROPOSAL]
- "bid" for an invitation for bids, "proposal" for an RFP, "quote" for an RFQ.
- [OPTIONAL_ONE_SENTENCE_FIT]
- One sentence at most, e.g. "We have provided HVAC maintenance to 14 public facilities in Westchester County since 2015 and meet the minimum qualifications in Section 3." Delete if the buyer supplied a form.
- [NOTICES_CONTACT_NAME]
- Whoever will watch for addenda daily until the due date, usually your proposal manager.
- [MEETING_DATE], [ATTENDEE_NAMES]
- Only if there is a pre-bid conference or site visit. Some buyers cap attendees or require advance registration.
- [EIN], [VENDOR_ID], [UEI]
- Only the identifiers the solicitation asks for.
- [NON_BINDING_OR_ELIGIBILITY_SENTENCE]
- Usually "We understand this notice does not obligate either party." If the notice is mandatory, write "We submit this notice as required by Section [SECTION] of the solicitation."
How to decline an RFP without burning the bridge
Deciding not to bid is a sound business decision when the fit, timing or terms are wrong. Saying nothing is not. Many purchasing offices remove vendors from their bidders lists after a run of unanswered invitations (three consecutive non-responses is a common rule, though policies vary), while a returned no-bid response usually keeps you active. Check the buyer's policy if you depend on its invitations.
A no-bid letter also gives the buyer useful feedback. If several qualified vendors decline for the same reason, such as an unrealistic start date or an insurance requirement out of proportion to the work, the buyer may change the next solicitation. Keep the reason short, true and free of criticism.
| Your real reason | How to say it |
|---|---|
| The schedule is impossible | “Our crews are committed through [MONTH], and we could not meet the required start date without compromising quality.” |
| The scope is outside what we do | “The scope extends beyond our core services in [AREA], and we bid only where we can perform the full requirement ourselves.” |
| The terms carry too much risk | “Certain contract terms, including [TERM], fall outside our company's risk policy.” |
| Bonding or insurance limits exceed ours | “The required [BOND_OR_COVERAGE] exceeds our current capacity. We expect that to change by [TIMEFRAME] and would welcome future opportunities.” |
| We are at capacity | “We are fully committed on current contracts and could not give this project the attention it deserves.” |
| We think the incumbent is locked in | Usually better left unsaid. Give a capacity or fit reason instead, or decline without a reason. |
Template
No-bid letter that keeps the relationship
A courteous statement of no bid that thanks the buyer, gives one honest reason, offers optional constructive feedback and asks to stay on the bidders list.
When to use it
Use it as soon as you decide not to respond to a solicitation you were invited to, sent a notice of intent for, or want to keep receiving. If the buyer supplied a no-bid response form, complete that form and attach this letter as a courtesy.
[COMPANY_LETTERHEAD] [DATE] [CONTACT_NAME], [CONTACT_TITLE] [AGENCY_OR_ORGANIZATION_NAME] [ADDRESS] Re: Statement of No Bid, [SOLICITATION_TITLE], [SOLICITATION_NUMBER] Dear [SALUTATION] [LAST_NAME]: Thank you for including [COMPANY_SHORT_NAME] in [SOLICITATION_TITLE]. After reviewing the solicitation carefully, we have decided not to submit a [BID_OR_PROPOSAL] for this procurement. [ONE_OR_TWO_SENTENCE_REASON] [OPTIONAL_CONSTRUCTIVE_FEEDBACK] We remain very interested in working with [AGENCY_SHORT_NAME]. Please keep [COMPANY_SHORT_NAME] on your bidders list for [CATEGORIES_OR_CODES], and do not hesitate to contact us for future quotes, bids and proposals. [IF_FORM_SUPPLIED: We have also completed the no-bid response form included with the solicitation.] Our current capability statement is attached for your files. Thank you again for the opportunity. Sincerely, [SIGNATURE] [SIGNER_NAME] [SIGNER_TITLE] [COMPANY_LEGAL_NAME] [PHONE] | [EMAIL]
Fields to fill in
- [ONE_OR_TWO_SENTENCE_REASON]
- Pick one line from the table above and make it specific. Never criticize the buyer, the specification or a competitor.
- [OPTIONAL_CONSTRUCTIVE_FEEDBACK]
- Only if it is genuinely useful, e.g. "If this work is reissued, a 60-day mobilization period or a separate lot for the two outlying sites would allow more small firms, including ours, to compete." Delete otherwise.
- [CATEGORIES_OR_CODES]
- The buyer's own category names or commodity codes for your work, so the list entry is accurate.
- [IF_FORM_SUPPLIED]
- Keep this sentence only if the solicitation included a no-bid form.
- [SIGNER_NAME], [SIGNER_TITLE]
- Ideally the same person who would have signed the bid, which signals the decision was made at the right level.
How do you get on a bidders list? The request letter
Many local governments, school districts, public authorities and housing agencies keep vendor lists by commodity or service category. When they buy below their formal bidding limits, purchasing staff often request quotes from vendors on those lists. Prime contractors keep supplier and subcontractor databases too, especially to meet M/WBE, DBE or SDVOB participation goals on public work. A clear request letter, with your capability statement attached, gets you onto those lists.
Federal agencies generally publicize their solicitations openly rather than relying on mailing lists, so this letter matters most at the state, local and prime-contractor level. Ask first whether the buyer has an online vendor registration. Many do, and some no longer accept letters; in that case, register online and send the letter as a short introduction to the buyer who handles your category.
- City, town, village and county purchasing departments, which often buy small-dollar goods and services by informal quote.
- School districts and BOCES (in New York, Boards of Cooperative Educational Services run cooperative bids for their member districts).
- Public housing authorities and public authorities for transit, ports, water and economic development.
- Public colleges and hospitals that buy under public procurement rules.
- Prime contractors' supplier diversity and subcontracting programs, especially on projects with participation goals. See Subcontracting and Teaming and, for corporate and institutional buyers, how to get on private bidder lists.
Template
Request to be added to a bidders list
A one-page request that gives a purchasing office everything it needs to classify you correctly: categories and codes, service area, certifications, insurance, bonding and recent experience.
When to use it
Use it for purchasing offices that maintain vendor or bidders lists, for prime contractors' subcontractor databases, and as a cover note when you complete a buyer's online vendor registration. Attach your capability statement.
[COMPANY_LETTERHEAD] [DATE] [PURCHASING_DIRECTOR_NAME], [PURCHASING_DIRECTOR_TITLE] [AGENCY_OR_COMPANY_NAME], [PURCHASING_DEPARTMENT] [ADDRESS] Re: Request to Be Added to Bidders List for [CATEGORY_NAMES] Dear [SALUTATION] [LAST_NAME]: [COMPANY_LEGAL_NAME] respectfully requests to be added to [AGENCY_OR_COMPANY_NAME]'s bidders list for the categories below, so that we may receive invitations for quotes, bids and proposals. Company: [COMPANY_LEGAL_NAME] [DBA_IF_ANY] Address: [STREET], [CITY], [STATE] [ZIP] Contact for solicitations: [CONTACT_NAME], [CONTACT_TITLE], [EMAIL], [PHONE] Federal EIN: [EIN] Year established: [YEAR] Employees: [EMPLOYEE_COUNT] Categories and codes: [CATEGORY_NAMES]; NAICS [NAICS_CODES]; [BUYER_COMMODITY_CODES] Service area: [COUNTIES_OR_REGION] Certifications: [CERTIFICATIONS_WITH_AGENCY_AND_NUMBER] Insurance: General liability [GL_LIMIT] per occurrence; [OTHER_COVERAGES] Bonding capacity (construction only): [SINGLE_LIMIT] single project / [AGGREGATE_LIMIT] aggregate, through [SURETY_NAME] Registrations: [VENDOR_REGISTRATIONS] Recent relevant experience: - [CLIENT_1]: [SCOPE_1], [YEAR_1], [VALUE_1] - [CLIENT_2]: [SCOPE_2], [YEAR_2], [VALUE_2] - [CLIENT_3]: [SCOPE_3], [YEAR_3], [VALUE_3] Our capability statement is enclosed. We accept [PAYMENT_METHODS] and can provide a W-9, certificates of insurance and references on request. If [AGENCY_OR_COMPANY_NAME] uses an online vendor registration or an application form, please let us know and we will complete it promptly. Thank you for considering [COMPANY_SHORT_NAME] for future opportunities. Sincerely, [SIGNATURE] [SIGNER_NAME], [SIGNER_TITLE] [COMPANY_LEGAL_NAME] Enclosure: Capability statement
Fields to fill in
- [PURCHASING_DIRECTOR_NAME]
- The purchasing agent, director of purchasing or, for a prime contractor, the supplier diversity or subcontracts manager. Call the main number and ask who maintains the list.
- [CATEGORY_NAMES]
- Plain-English categories, e.g. "janitorial supplies; floor care services."
- [NAICS_CODES]
- Two to five six-digit NAICS codes that match your federal and state registrations.
- [BUYER_COMMODITY_CODES]
- The buyer's own codes if it uses them, often NIGP commodity codes in state and local government. Ask the purchasing office for its code list. Delete if not used.
- [COUNTIES_OR_REGION]
- Where you can actually perform, e.g. "Nassau, Suffolk and Queens counties."
- [CERTIFICATIONS_WITH_AGENCY_AND_NUMBER]
- Only current certifications, e.g. "NYC M/WBE (Department of Small Business Services), No. [NUMBER]." Write "None" if you hold none.
- [GL_LIMIT], [OTHER_COVERAGES]
- Your current limits, e.g. "$1,000,000 per occurrence; auto, workers' compensation, umbrella $5,000,000."
- [SINGLE_LIMIT], [AGGREGATE_LIMIT], [SURETY_NAME]
- Construction and trades only, confirmed with your surety. Delete the line otherwise.
- [VENDOR_REGISTRATIONS]
- Registrations the buyer will recognize, e.g. NYC PASSPort account, New York State vendor ID, NJ Public Works Contractor Registration number, CTsource registration.
- [CLIENT_1] to [VALUE_3]
- Three recent, relevant jobs, public clients first. Use real values or ranges you can document.
- [PAYMENT_METHODS]
- e.g. "purchase orders, procurement cards and ACH payment." Accepting purchasing cards makes small buys easier for the buyer.
Adapting bid letters for construction, IT, professional services and nonprofits
The templates work across sectors, but each sector has its own must-mention items and its own traps. Use the table to decide what to add to the optional sentences and the identification block.
| Sector | Add or emphasize | Watch out for |
|---|---|---|
| Construction and trades | Bid security, bonding capacity, license and registration numbers (for example New Jersey's public works contractor registration, which must be in place when you submit a public works bid), prevailing wage experience, safety record, subcontractor and M/WBE utilization plans | Unacknowledged addenda that change drawings or quantities; unsigned or unnotarized affidavits; listing an unregistered subcontractor where registration is required |
| IT and technology | Security credentials you actually hold (a SOC 2 report, ISO/IEC 27001 certification, a CMMC level for defense work), named key personnel, hosting and data-location commitments, contract vehicles | Restating your standard license or cloud terms as conditions in the letter, which can read as an exception to the buyer's terms |
| Professional services (consulting, engineering, architecture, accounting, legal) | Licensed professionals and license numbers, key staff availability, conflict-of-interest statement, relevant agency experience | Qualifications-based selections for architecture and engineering, where many public buyers rank firms on qualifications first and negotiate fees later, so mentioning price can be out of place |
| Nonprofit and human services | Mission alignment, populations and neighborhoods served, outcomes, prequalification status (New York State requires nonprofits to prequalify in the Statewide Financial System before competing for state grants; New York City human services RFPs require an approved HHS Accelerator prequalification in PASSPort), board authorization where required | A letter signed by program staff when the solicitation requires the executive director or board chair; a missing board resolution; an expired prequalification |
Common bid letter mistakes and a final check before you send
Most problems with bid letters come from rushing them at the end. Write the cover letter early, when your win themes are fresh, then revise it last against the final proposal. Use the checklist below on every letter in this chapter.
Do
- Do: Draft the cover letter when the outline is approved, then update it after the final review
- Do: Copy titles, numbers, names and dates from the solicitation, not from memory
- Do: Keep a signed PDF and the native file in the bid folder
- Do: Ask someone who did not write it to read it aloud before it goes out
Don't
- Don't: Reuse last month's letter and forget to change the agency name
- Don't: Promise something the proposal does not deliver
- Don't: Add exceptions, prices or conditions the instructions put elsewhere
- Don't: Contact anyone other than the designated contact about the solicitation
Frequently asked questions
What should an RFP cover letter include?
An RFP cover letter should include the exact solicitation title and number, a one-sentence thank-you, a short statement of the buyer's goal in its own words, a statement that your proposal meets every requirement and acknowledges all addenda, the period your offer stays valid, three provable reasons to choose you, the name and contact details of the person authorized to negotiate, and the signature of someone authorized to bind your company. If the solicitation lists required statements or supplies a form, those come first.
How long should a proposal cover letter be?
One page is ideal and two pages is the practical maximum, unless the buyer prescribes a format. Check whether the cover letter counts toward the proposal's page limit; some solicitations exclude it and some do not. Details belong in the executive summary, not the letter.
What is the difference between a cover letter and a transmittal letter?
A cover letter introduces the proposal and makes a brief case for your company. A transmittal letter is more formal: it lists what is enclosed, acknowledges addenda, confirms the offer validity period and identifies who can bind the company. In sealed bidding the transmittal function matters most. Many buyers use the terms interchangeably, so follow whatever the solicitation describes.
Is a letter of intent to bid binding?
Usually not. A letter of intent to bid tells the buyer you plan to respond, and you can still decide not to submit. Some solicitations, however, make a notice of intent mandatory to receive addenda or to be eligible to submit, so read the instructions and meet the intent deadline. If you change your mind after sending one, send a short no-bid letter.
Should I send a letter if I decide not to bid?
Yes, in most cases. A short no-bid letter thanks the buyer, gives one honest reason and asks to stay on the bidders list. Many purchasing offices remove vendors who leave several invitations unanswered, while a returned no-bid response usually keeps you active. It also gives the buyer feedback that can improve the next solicitation.
How do I get on a government bidders list?
Start with the buyer's online vendor registration, if it has one. Then send a one-page request to the purchasing office naming your categories and codes (NAICS and any commodity codes the buyer uses), service area, certifications, insurance, bonding and recent experience, with your capability statement attached. Because lists are not complete or guaranteed, also run saved searches and alerts for the same categories so you see publicly advertised bids.
Who should sign a bid or proposal cover letter?
An owner or officer with legal authority to commit the company to a contract. Many solicitations require the cover letter, bid form or affidavits to be signed by an authorized signatory, and some require evidence of authority when an agent signs. A proposal manager can draft the letter, but the signature should come from someone who can bind the company.
Complete handbook
Download the complete handbook (PDF)
All 8 chapters, templates and checklists, ready to print or share.
Put it into practice
Search open RFPs from federal, state, local, education, private and non-profit issuers, each with the RFP Detector Score.
Find RFPs